SEH Computertechnik TPG60 user manual How to Define the Bandwidth?

ThinPrint® Settings

What do you want to do?

Defining the ThinPrint® Port via the InterCon-NetTool

Proceed as follows:

1.Start the InterCon-NetTool.

2.Double-click the TPG60 in the print server list. The Properties dialog appears.

3.Select Configuration – ThinPrint® from the navigation bar.

4.Enter the port number into the ThinPrint® port box.

ªThe setting is saved.

6.2How to Define the Bandwidth?

Bandwidth describes the capacity of a data connection. The bandwidth of the TPG60 is indicated in bit/second (bit/s).

The bandwidth that is needed for print jobs can be limited to a freely definable value for each ThinPrint® port (server side). You can further decrease the bandwidth limit on the port of the TPG60 (client side).

Defining a value which is higher than the defined value (server side) will have no effect. In this case, the pre-defined value will be applied.

†’Defining the Bandwidth via the TPG Homepage’ Ö49

†’Defining the Bandwidth via the InterCon-NetTool’ Ö50

Defining the Bandwidth via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Configuration – ThinPrint®.

3.Tick Bandwidth.

4.Enter the desired bandwidth.

5.Click Save to confirm.

TPG60 User Manual 49