SEH Computertechnik TPG60 user manual How to Configure Parameters?

Parameter

4.2How to Configure Parameters?

TPG60 parameters can be configured in many ways.

Configuring Parameters via the TPG Homepage

All TPG60 parameters can be configured via the TPG Homepage; see: ’Administration via the TPG Homepage’ Ö15.

Configuring Parameters via the InterCon-NetTool

All TPG60 parameters can be configured via the InterCon-NetTool; see: ’Configuring TPG Parameters’ Ö21.

Configuring Parameters via an FTP Connection

You can configure all TPG60 parameters via FTP. To this purpose, you must download the 'parameters' file to your local computer via FTP and then edit it.

Proceed as follows:

1.Switch to the directory in which you wish to save the file.

2.Open an FTP connection to the TPG60: Syntax: ftp <IP Address> Example: ftp 192.168.0.123

3.Enter an arbitrary user name.

4.Enter either the TPG60 password or press ENTER if no password has been assigned.

5.Transfer the ‘parameters’ file from the TPG60 to your local computer:

get parameters

6.Edit the file using any text editor; see: ’Parameter List’ Ö78.

7.Send the file back to the TPG60: put parameters

8.Close the FTP connection: quit

TPG60 User Manual 32