Firmware Update
Fig. 8: InterCon-NetTool - Firmware Update
Standard Firmware Update via FTP
You can update the standard firmware of your TPG60 via an FTP connection.
Proceed as follows:
1.Change to the directory where the firmware file is located.
2.Open an FTP connection to the TPG60:
Syntax: ftp <IP address of the TPG60>
Example: ftp 192.168.0.123
3.Enter an arbitrary user name.
4.Enter either the TPG60 password or press ENTER if no password has been assigned.
5.Switch to binary mode: bin
6.Transfer the firmware file to the TPG60:
Syntax: put <name of firmware file> binfile
Example: put hp93.bin binfile
7.Close the FTP connection: quit
TPG60 User Manual | 73 |