SEH Computertechnik TPG60 user manual How to Adapt the Speed to the Network Components?

Page 45

Network and Device Settings

What do you want to do?

2.Double-click the TPG60 in the print server list. The Properties dialog appears.

3.Select Configuration – General from the navigation bar.

4.Select the desired language from the TPG language list.

5.Click OK to confirm.

ªThe settings are saved.

5.5How to Adapt the Speed to the Network Components?

You can adapt the speed of the TPG60 to other network components, such as switches or hubs.

The 'Auto' mode is preset. The speed is identified automatically and adapted to the other network components.

If you set the speed manually, the speed must correspond to the speed of the other network components. It is not possible to operate the TPG60 with full duplex if the hub is operated with half duplex.

’Adapting the Speed via the TPG Homepage’ Ö45

’Adapting the Speed via the InterCon-NetTool’ Ö46

Adapting the Speed via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Configuration – General.

3.Select the desired setting from the Ethernet settings list.

4.Click Save to confirm.

ªThe setting is saved.

TPG60 User Manual

45

Image 45

Contents ThinPrint Gateway SEH Computertechnik GmbH Phone +49 0521Support +49 521 Table of Contents Firmware Update ThinPrint SettingsSecurity Certificate ManagementGeneral Information PurposeSystem Requirements Conventions within the documentation DocumentationSupport Information BoldFrom 800 a.m. to 415 p.m. CET Hardware Address Basic TerminologyIP Address TPG Default NameHost Name GatewaySafety Regulations First StepsSubnet Mask ZeroConf Saving the IP Address in the TPG60InterCon-NetTool IP Wizard Bootp Syntax ping IP address Example ping Administration Methods Administration via the TPG HomepageTPG Homepage appears Administration Administration via the InterCon-NetTool Menu bar Meaning of the icons are described in the following Logging Configuring TPG Parameters InterCon-NetTool Properties Administration via an FTP ConnectionAdministration via the TPG60 Status Button Status Information How to Display Status Information?Obtaining Information via the TPG Homepage Select Status GeneralDisplaying the Job History via the TPG Homepage How to Display the Job History?Select Status Job History Displaying the Job History via the InterCon-NetToolHow to Print a Status Page? Select Configuration General Select Actions Print Status Page from the menu bar Printing the Status Page via the InterCon-NetToolPrinting the Status Page via the TPG60 Status Button Printing the Status Page via an FTP ConnectionHow to Print Parameters? Service Printing the Service Page via the TPG60 Status ButtonParameter Printing the Service Page via an FTP Connection Configuring Parameters via the TPG Homepage How to Configure Parameters?Configuring Parameters via the InterCon-NetTool Configuring Parameters via an FTP ConnectionHighlight the TPG60 InterCon-NetTool Parameter Download Editing the ’Parameters’ File using a Text EditorClick Start download How to Reset Parameters to their Default Settings? Select Actions Download Area Select Parameter DownloadClick Download Select Actions Default Settings Resetting Parameters via the TPG HomepageResetting Parameters via the InterCon-NetTool Select Actions Default Settings from the menu barResetting Parameters via the TPG60 Status Button Resetting Parameters via an FTP ConnectionHow to Configure the DNS? Network and Device SettingsSelect Configuration DNS Configuring DNS via the TPG HomepageConfiguring DNS via the InterCon-NetTool DNS ParametersConfiguring TCP/IP Parameters via the TPG Homepage How to Configure TCP/IP Parameters?Select Configuration TCP/IP Configuring TCP/IP Parameters via the InterCon-NetToolARP/PING How to Configure the Device Time?Configuring the Device Time via the TPG Homepage Select Configuration TimeConfiguring the Device Time via the InterCon-NetTool How to Configure the Language of the Device? Adapting the Speed via the TPG Homepage How to Adapt the Speed to the Network Components?Adapting the Speed via the InterCon-NetTool How to Restart the TPG60?Restarting the TPG60 via the TPG Homepage Select Actions Restart Click Restart TPGHow to Determine a Description? Determining Descriptions via the TPG HomepageDetermining Descriptions via the InterCon-NetTool How to Define the ThinPrint Port? ThinPrint SettingsSelect Configuration ThinPrint Defining the ThinPrint Port via the TPG HomepageSelect Configuration ThinPrint Tick Bandwidth How to Define the Bandwidth?Defining the ThinPrint Port via the InterCon-NetTool Defining the Bandwidth via the TPG HomepageHow to Define Printers? Defining the Bandwidth via the InterCon-NetToolIntegrating Printers via the TPG Homepage Printer Parameters Integrating Printers via the InterCon-NetToolSelect Configuration ThinPrint Tick Connection Service Configuring the Connection Service via the TPG HomepageConfiguring the Connection Service via the InterCon-NetTool Select the Connection Service tab Tick Connection ServiceHow Does the TPG60 Receive Encrypted Data? Connection Service ParameterThinPrint Settings Security Defining the Password via the TPG Homepage Select Configuration ProtectionDefining the Password via the InterCon-NetTool Assigning Authorizations via the InterCon-NetTool Assigning Authorizations via the TPG HomepageHow to Protect the TPG60 against Viruses? Disabling the Http Protocol via the TPG HomepageDisabling the Http Protocol via the InterCon-NetTool 59 Select EAP-MD5/LEAP from the Authentication list Enabling EAP-TLS Authentication via the TPG Homepage Enabling EAP-TLS Authentication via the InterCon-NetTool Certificate Management Select Configuration Certificates Select TPG certificate How to Create a Self-signed Certificate?Creating Self-signed Certificates via the TPG Homepage Click Create self-signed certificateParameters for the Creation of Certificates Creating Self-signed Certificates via the InterCon-NetToolSelect Configuration Certificates How to Create a Certificate Request for CA Certificates?Creating a Certificate Request via the TPG Homepage Click Create certificate requestCreating a Certificate Request via the InterCon-NetTool How to Save CA Certificates in the TPG60?Saving CA Certificates via the TPG Homepage How to Save Root Certificates in the TPG60?Click Load Certificate Saving CA Certificates via the InterCon-NetToolSelect Configuration Certificates Select Root certificate How to Delete Certificates?Saving Root Certificates via the TPG Homepage Click Load root certificateDeleting Certificates via the InterCon-NetTool Deleting Certificates via the TPG HomepageFirmware Update Standard Firmware Update via the TPG Homepage How to Realize a Standard Firmware Update?Standard Firmware Update via the InterCon-NetTool Click Start updateInterCon-NetTool Firmware Update Standard Firmware Update via FTPDynamic Firmware Update via the TPG Homepage How to Configure Dynamic Firmware Updates?Example ftp//file.server.de/hp93.bin Dynamic Firmware Update via FTP Dynamic Firmware Update via the InterCon-NetToolHow to Realize a Firmware Update for Several TPG60? Parameter List General Parameter ListParameter List ThinPrint Parameter List TCP/IP = Snmp Parameter List Sntp Parameter List DNSParameter List Protection Parameter List EAP AuthenticationURL Parameter List Dynamic UpdateFTP connection 22 TPG60 status button IndexSntp server 42 SSL encryption TCP/IP