SEH Computertechnik TPG60 user manual 59

Security

Requirements

What do you want to do?

7.4How Does the TPG60 Authenticate Itself in the network via EAP-MD5/LEAP?

The IEEE 802.1x standard provides methods for authentication and authorization in networks. Within the scope of the IEEE 802.1x standard, the TPG60 supports the authentication protocol EAP-MD5/LEAP.

You can verify the identity of the TPG60 using the authentication method EAP-MD5/LEAP.

EAP-MD5/LEAP describes a user-based authentication method via a RADIUS server. The TPG60 must be defined as user (with user name and password) on a RADIUS server. The authentication method EAP-MD5/LEAP must then be enabled on the TPG60 and the user name and password need to be entered.

;The TPG60 is defined as user (with user name and password) on a RADIUS server.

†’Enabling EAP-MD5/LEAP Authentication via the TPG Homepage’

Ö59

†’Enabling EAP-MD5/LEAP Authentication via the InterCon-NetTool’ Ö60

Enabling EAP-MD5/LEAP Authentication via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Configuration – Protection.

3.Select Authentication.

4.Select EAP-MD5/LEAP from the Authentication list.

5.Enter the user name into the User name box.

6.Enter the password into the Password box.

7.Click Save to confirm.

ªThe settings are saved.

TPG60 User Manual 59