SEH Computertechnik TPG60 user manual Parameter List Protection, Parameter List EAP Authentication

Parameter List

Table 12: Parameter List - Protection

Parameter	Description	Default	Value
passwd	Password for the access control	[blank]
	If a password was set, you must
	enter the password before you
	can save the changes to the
	TPG60 parameters.
access_control	Enables/disables the password	off	on/off
	demand for TPG60 parameters.
	(Only makes sense if a password
	was set, see parameter 'passwd')
ip1_sender	IP address or host name of the	*	max. 255 characters
~	client allowed to address the
ip8_sender	TPG60 in the network. Once an
	IP sender has been defined, all
	undefined clients lose their
	authorization. Up to eight IP
	senders can be specified.
	Wildcards (*) can be used.
http	Enables/disables the HTTP	on	on/off
	protocol on the TPG60
	(The TPG Homepage cannot be
	started if the HTTP protocol is
	disabled.)

Table 13: Parameter List - EAP Authentication

Parameter	Description	Default	Value
eap_auth_type	Authentication method applied	1	1	= none
	by the TPG60 to identify itself in		2	= not defined
	the network.		3	= EAP-MD5/LEAP
			4	= EAP-TLS
eap_auth_name	Name of the TPG60 as saved in	[blank]	max. 64 characters
	the authentication server
	(RADIUS).
eap_auth_pwd	Password of the TPG60 as	[blank]	max. 64 characters
	saved in the authentication
	server (RADIUS).

TPG60 User Manual 83