Savin 2245, 3502/3502p, 4502/4502p, 2235, 2545/2545p, 2535/2535p manual Control Panel

Page 22

AdonisC2_ENcopy122F_FM.book Page 9 Thursday, February 15, 2001 3:23 PM

Control Panel

1.Screen Contrast knob

Adjusts the brightness of the display pan- el.

2.Indicators

These indicators show errors or the status of the machine. ⇒ P.169 “Troubleshoot- ing”.

3.{User Tools/Counter} key

•User Tools

Press to change the default settings and conditions to meet your require- ments.

•Counter

Press to check or print the total num- ber of copies made.

4.Display panel

Shows operation status, error messages, and function menus. ⇒ P.11 “Display Panel”.

5.{Check Modes} key

Press to check the entered copy job set- tings.

6.{Program} key

Press to select the program mode. ⇒ P.64 “Programs”.

7.{Clear Modes} key

Press to clear the previously entered copy job settings.

8.{Energy Saver} key

Press to switch to and from Energy Saver mode. ⇒ P.68 “Energy Saver Mode”.

9.{Interrupt} key

Press to make interrupt a long copy job to make copies. ⇒ P.68 “Interrupt Copy”.

10.Main power indicator

This indicator goes on when the main power switch is turned on, and goes off when the switch is turned off.

11.Operation switch

Press this switch to turn the power on (the On indicator goes on). To turn the power off, press this switch again (the On indicator goes off).

12.{Sample Copy} key

Use this key to make a single sample copy before starting a long copy run. By checking the sample copy and making any necessary changes to the image qual- ity settings before you make multiple copies, you can save time and paper. ⇒ P.69 “Sample Copy”.

13.{Start} key

Press to start copying. Press to start scan- ning and printing in Document Server mode.

9

Image 22

Contents Zdsh000j.eps ⇒ P.237 Power Connection Means Power ON. c means Stand by FCC RequirementsSafety Information Safety During OperationPage Preparation How to Read this ManualSymbols LimitationTable of Contents Basic Functions Job Preset Other FunctionsPreset Reduce/Enlarge Sort/Stack/Staple116 101112 121156 149151 161206 198202 207238 235236 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server 103 ⇒ P.39⇒ P.37 ⇒ P.77Guide To Components Bypass tray Right side cover Ventilation holeTo copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Options Control Panel Number keys Function Status indicatorClear/Stop key Function keysDisplays and Key Operations Display PanelInitial copy display Function menu Document Server initial displayFunction List Based on Options Set the paper of the same size KL in the paper trays Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the ma- chineTurning Off the Power Turning On the PowerPress the operation switch to make the On indicator goes on Turning Off the Main Power Changing Modes Inch version OriginalsMetric version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Sizes difficult to detectExposure glass Missing Image AreaDocument feeder Copy Paper Recommended Paper Sizes and TypesIfy the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Non-recommended Paper Paper StorageToner Storage TonerUsed Toner Basics Make sure that there are no previ- ous settings remaining Basic ProcedureMake sure that the machine is in Copy mode Set your originalsSystem Reset Lift the platen cover or the docu- ment feeder Setting OriginalsSetting Originals on the Exposure Glass Lower the platen cover or docu- ment feederStandard Orientation Setting Originals Document FeederOriginal Orientation TurnPress the key Press the OK key Setting Special OriginalsBatch mode Press the Batch keyMixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Press the Lighter or Darker key to adjust the density Make sure that the Auto Image Den- sity key is selectedSelecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Auto Paper Select Make sure that the Auto Paper Select key is selectedRotated copy Press the Auto Reduce/Enlarge key Auto Reduce/EnlargeSelect the paper tray Sort/Stack/Staple StackSort Shift Sort Press the Sort or Rotate Sort keySet the original, then press the Start key When the 2 Tray Finisher is installedEnter the number of copy sets with the number keys After all originals are scanned, press the # keyShift Stack StackEnter the number of copies with the number keys Set the original in the same direction as the first one Staple Stapling position and original setting Sheet Finisher Tray FinisherSelect one of the stapling positions Sort/Stack/Staple⇒ P.51 Stapling position and original setting Press the No key to resume scanning When Memory Reaches 0%To Remove the Paper from the Staple Unit Press the Yes keyPunch HolesPunch hole positions Punchable paper sizes are as follows Select the Punch positionEnter the number of copy sets with the number keys Copying from the Bypass Tray Open the bypass tray Adjust the guides to copy paper sizeExtender When copying onto custom size paper Press the # keyCopying Select OHP Sheet or Thick Paper When Copying onto OHP Transparencies or Thick PaperPress the OK key Set your originals and press the Start key Storing a Program Storing Your SettingsPrograms Deleting a ProgramRepeat steps E and F in Storing a Program Make sure the program settingsDeleting a Program Press the Do not Register keyRecalling a Program Cancel key Job PresetPress the Copy key Set up the next copy job Press the To Printing keyTo interrupt an original being fed Energy Saver Mode Interrupt CopyOther Functions Press the Interrupt keyTo interrupt copying after all originals have been fed Original BeeperSample Copy Set your original Press the Start keyPress the Continue key Press the Clear/Stop key when Copying is displayedPress the Change Quantity key Preset Reduce/Enlarge Ratio % Paper sizePress the Reduce/Enlarge key Create Margin modePress the Enlarge or Reduce key Enter the ratio Adjust the ratios with the n or o keyZoom Press the Mag. Ratio keyEnter the desired ratio with the number keys Size Magnification Press the Reduce/Enlarge key Press the Specifid Ratio keyPress the OK key Set your original, then press the Start key