Savin 3502/3502p, 4502/4502p, 2235, 2545/2545p, 2245 manual Preset Reduce/Enlarge, Ratio % Paper size

Page 84

AdonisC2_ENcopy122F_FM.book Page 71 Thursday, February 15, 2001 3:23 PM

Preset Reduce/Enlarge

Preset Reduce/Enlarge

You can select a preset ratio for copy- ing.

Note

❒You can select one of 12 preset ra- tios (5 enlargement ratios, 7 reduc- tion ratios).

❒Use “Create Margin” to reduce the image to 93% of its original size with the centre as reference. You can register this function in a shortcut key on the initial display.

❒You can change the preset ratios to other ratios you frequently use. ⇒

“Enlarge” in P.219 “Reproduction

Ratio 1/2” and “Reduce” in P.220 “Reproduction Ratio 2/2”.

❒You can set and display three

kinds of ratio on the initial display. ⇒ “Shortcut R/E” in P.219 “Repro- duction Ratio 1/2”.

❒You can specify which of [Reduce], [Enlarge] or [Mag. Ratio] is to be giv- en priority and displayed when the [Reduce/Enlarge] key is pressed.

❒You can select a ratio regardless of the size of an original or copy pa- per. With some ratios, parts of the image might not be copied or mar- gins will appear on copies.

❒Copies can be reduced or enlarged as follows:

❖Metric version

	Original → Copy
Ratio (%)	paper size

400 (enlarge area	--
by 16)

200 (enlarge area	A5→A3
by 4)

141 (enlarge area	A4→A3, A5→A4
by 2)

122	F→A3, A4→B4

115	B4→A3

93	--

82	F→A4, B4→A4

75	B4→F4, B4→F

71 (reduce area by	A3→A4, A4→A5
1/2)
65	A3→F

50 (reduce area by	A3→A5, F→A5
1/4)

25	--

❖ Inch version

Ratio (%)	Original → Copy
	paper size

400 (enlarge area	--
by 16)

200 (enlarge area	51/2" ⋅ 81/2"→11" ⋅
by 4)	17"

155 (enlarge area	51/2" ⋅ 81/2"→81/2"
by 2)	⋅ 14"

129	81/2" ⋅ 11"→11" ⋅
	17"

121	81/2" ⋅ 14"→11" ⋅
	17"

93	--

85	F→81/2" ⋅ 11"

78	81/2" ⋅ 14"→81/2" ⋅
	11"

2

71

Image 84

Contents Zdsh000j.eps ⇒ P.237 Power Connection Means Power ON. c means Stand by FCC RequirementsSafety Information Safety During OperationPage How to Read this Manual SymbolsPreparation LimitationTable of Contents Job Preset Other Functions Preset Reduce/EnlargeBasic Functions Sort/Stack/Staple101 112116 121149 151156 161198 202206 207235 236238 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.39 ⇒ P.37103 ⇒ P.77Guide To Components Bypass tray Right side cover Ventilation holeOutput Tray Guide To copy onto normal paper and thick paperTo copy onto OHP transparencies and translucent paper Options Control Panel Function Status indicator Clear/Stop keyNumber keys Function keysDisplay Panel Displays and Key OperationsInitial copy display Function menu Document Server initial displayFunction List Based on Options Set the paper of the same size KL in the paper trays Turning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the ma- chineTurning On the Power Turning Off the PowerPress the operation switch to make the On indicator goes on Turning Off the Main Power Changing Modes Originals Metric versionInch version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Sizes difficult to detectMissing Image Area Exposure glassDocument feeder Copy Paper Recommended Paper Sizes and TypesIfy the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Non-recommended Paper Paper StorageToner Toner StorageUsed Toner Basics Basic Procedure Make sure that the machine is in Copy modeMake sure that there are no previ- ous settings remaining Set your originalsSystem Reset Setting Originals Setting Originals on the Exposure GlassLift the platen cover or the docu- ment feeder Lower the platen cover or docu- ment feederSetting Originals Document Feeder Original OrientationStandard Orientation TurnSetting Special Originals Batch modePress the key Press the OK key Press the Batch keyMixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Press the Lighter or Darker key to adjust the density Make sure that the Auto Image Den- sity key is selectedSelecting Original Type Setting Selecting Copy Paper Auto Paper SelectManual Paper Select Auto Paper Select Make sure that the Auto Paper Select key is selectedRotated copy Auto Reduce/Enlarge Press the Auto Reduce/Enlarge keySelect the paper tray Sort/Stack/Staple StackSort Shift Sort Press the Sort or Rotate Sort keyWhen the 2 Tray Finisher is installed Enter the number of copy sets with the number keysSet the original, then press the Start key After all originals are scanned, press the # keyStack Shift StackEnter the number of copies with the number keys Set the original in the same direction as the first one Staple Stapling position and original setting Sheet Finisher Tray FinisherSelect one of the stapling positions Sort/Stack/Staple⇒ P.51 Stapling position and original setting When Memory Reaches 0% To Remove the Paper from the Staple UnitPress the No key to resume scanning Press the Yes keyPunch HolesPunch hole positions Punchable paper sizes are as follows Select the Punch positionEnter the number of copy sets with the number keys Open the bypass tray Adjust the guides to copy paper size Copying from the Bypass TrayExtender When copying onto custom size paper Press the # keyCopying When Copying onto OHP Transparencies or Thick Paper Select OHP Sheet or Thick PaperPress the OK key Set your originals and press the Start key Storing Your Settings ProgramsStoring a Program Deleting a ProgramMake sure the program settings Deleting a ProgramRepeat steps E and F in Storing a Program Press the Do not Register keyRecalling a Program Job Preset Press the Copy key Set up the next copy jobCancel key Press the To Printing keyEnergy Saver Mode Interrupt Copy Other FunctionsTo interrupt an original being fed Press the Interrupt keyOriginal Beeper Sample CopyTo interrupt copying after all originals have been fed Set your original Press the Start keyPress the Clear/Stop key when Copying is displayed Press the Continue keyPress the Change Quantity key Preset Reduce/Enlarge Ratio % Paper sizeCreate Margin mode Press the Reduce/Enlarge keyPress the Enlarge or Reduce key Adjust the ratios with the n or o key ZoomEnter the ratio Press the Mag. Ratio keyEnter the desired ratio with the number keys Size Magnification Press the Reduce/Enlarge key Press the Specifid Ratio keyPress the OK key Set your original, then press the Start key