Savin 2535/2535p, 3502/3502p, 2235 Punchable paper sizes are as follows, Select the Punch position

Page 71

AdonisC2_ENcopy122F_FM.book Page 58 Thursday, February 15, 2001 3:23 PM

2

58

Copying

	Direction in which Original is Set		Punch Hole Positions
	Exposure glass	Document feeder
4 holes	K
º Turn	L
90	L
90

❒Punchable paper sizes are as follows:

With 2 Tray Finisher

Punch kit type

2 & 4 holes type		2 holes	L	A3-A5, 11" ⋅ 17"-51/2" ⋅ 81/2"

			K	A4-A5, 81/2" ⋅ 11"-51/2" ⋅ 81/2"

		4 holes	L	A3, B4, 11" ⋅ 17"

			K	A4, B5, 81/2" ⋅ 11"

4 holes type		4 holes	L	A3-A5, 11" ⋅ 17"-51/2" ⋅ 81/2"

			K	A4-A5, 81/2" ⋅ 11"-51/2" ⋅ 81/2"

2 & 3 holes type		2 holes	L	A3-A5, 11" ⋅ 17"-51/2" ⋅ 81/2"

			K	A4-A5, 81/2" ⋅ 11"-51/2" ⋅ 81/2"

		3 holes	L	A3, B4, 11" ⋅ 17"

			K	A4, B5, 81/2" ⋅ 11"

❒ Since punch holes are made in each copy, the punch hole positions vary slightly.

❒ The punch hole positions change according to the direction of the paper selected.

Reference

If the punch waste box fills up, ⇒ P.206 “y Removing Punch Waste”.

A Select the Punch position.

Note

❒When stapling copies, also select a stapling position. ⇒ P.50 “Staple”.

Image 71

Contents Zdsh000j.eps ⇒ P.237 Power Connection FCC Requirements Means Power ON. c means Stand bySafety During Operation Safety InformationPage Limitation How to Read this ManualSymbols PreparationTable of Contents Sort/Stack/Staple Job Preset Other FunctionsPreset Reduce/Enlarge Basic Functions121 101112 116161 149151 156207 198202 206239 235236 238Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.77 ⇒ P.39⇒ P.37 103Guide To Components Ventilation hole Bypass tray Right side coverTo copy onto OHP transparencies and translucent paper Output Tray GuideTo copy onto normal paper and thick paper Options Control Panel Function keys Function Status indicatorClear/Stop key Number keysInitial copy display Display PanelDisplays and Key Operations Document Server initial display Function menuFunction List Based on Options Set the paper of the same size KL in the paper trays Main power switch left side of the ma- chine Turning On the PowerTurning On the Main Power Operation switch right side of the control panelPress the operation switch to make the On indicator goes on Turning On the PowerTurning Off the Power Turning Off the Main Power Changing Modes Non-recommended originals for the document feeder OriginalsMetric version Inch versionSizes difficult to detect Sizes Detectable by the Auto Paper SelectDocument feeder Missing Image AreaExposure glass Recommended Paper Sizes and Types Copy PaperIfy the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Paper Storage Non-recommended PaperUsed Toner TonerToner Storage Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previ- ous settings remainingSystem Reset Lower the platen cover or docu- ment feeder Setting OriginalsSetting Originals on the Exposure Glass Lift the platen cover or the docu- ment feederTurn Setting Originals Document FeederOriginal Orientation Standard OrientationPress the Batch key Setting Special OriginalsBatch mode Press the key Press the OK keyMixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Make sure that the Auto Image Den- sity key is selected Press the Lighter or Darker key to adjust the densitySelecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select Make sure that the Auto Paper Select key is selected Auto Paper SelectRotated copy Select the paper tray Auto Reduce/EnlargePress the Auto Reduce/Enlarge key Stack Sort/Stack/StapleSort Press the Sort or Rotate Sort key Shift SortAfter all originals are scanned, press the # key When the 2 Tray Finisher is installedEnter the number of copy sets with the number keys Set the original, then press the Start keyEnter the number of copies with the number keys StackShift Stack Set the original in the same direction as the first one Staple Stapling position and original setting Tray Finisher Sheet FinisherSort/Stack/Staple Select one of the stapling positions⇒ P.51 Stapling position and original setting Press the Yes key When Memory Reaches 0%To Remove the Paper from the Staple Unit Press the No key to resume scanningHoles PunchPunch hole positions Select the Punch position Punchable paper sizes are as followsEnter the number of copy sets with the number keys Extender Open the bypass tray Adjust the guides to copy paper sizeCopying from the Bypass Tray Press the # key When copying onto custom size paperCopying Press the OK key Set your originals and press the Start key When Copying onto OHP Transparencies or Thick PaperSelect OHP Sheet or Thick Paper Deleting a Program Storing Your SettingsPrograms Storing a ProgramPress the Do not Register key Make sure the program settingsDeleting a Program Repeat steps E and F in Storing a ProgramRecalling a Program Press the To Printing key Job PresetPress the Copy key Set up the next copy job Cancel keyPress the Interrupt key Energy Saver Mode Interrupt CopyOther Functions To interrupt an original being fedSet your original Press the Start key Original BeeperSample Copy To interrupt copying after all originals have been fedPress the Change Quantity key Press the Clear/Stop key when Copying is displayedPress the Continue key Ratio % Paper size Preset Reduce/EnlargePress the Enlarge or Reduce key Create Margin modePress the Reduce/Enlarge key Press the Mag. Ratio key Adjust the ratios with the n or o keyZoom Enter the ratioEnter the desired ratio with the number keys Press the Reduce/Enlarge key Press the Specifid Ratio key Size MagnificationPress the OK key Set your original, then press the Start key