Savin 2535/2535p, 3502/3502p, 4502/4502p, 2235, 2545/2545p, 2245 manual

Page 5

AdonisC2_ENcopy122F_FM.book Page ii Thursday, February 15, 2001 3:23 PM

RCAUTION:

•Protect the equipment from dampness or wet weather, such as rain, snow, and so on.

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•Do not allow paper clips, staples, or other small metallic objects to fall inside the equipment.

•Keep toner (used or unused) and toner bottle out of the reach of children.

•For environmental reasons, do not dispose of the equipment or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer or at appropriate collection sites.

•The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise it could cause a personal burn.

•Our products are engineered to meet high standards of quality and function- ality, and we recommend that you only use the expendable supplies avail- able at an authorized dealer.

ii

Image 5

Contents Zdsh000j.eps ⇒ P.237 Power Connection FCC Requirements Means Power ON. c means Stand bySafety During Operation Safety InformationPage Symbols How to Read this ManualPreparation LimitationTable of Contents Preset Reduce/Enlarge Job Preset Other FunctionsBasic Functions Sort/Stack/Staple112 101116 121151 149156 161202 198206 207236 235238 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.37 ⇒ P.39103 ⇒ P.77Guide To Components Ventilation hole Bypass tray Right side coverTo copy onto OHP transparencies and translucent paper Output Tray GuideTo copy onto normal paper and thick paper Options Control Panel Clear/Stop key Function Status indicatorNumber keys Function keysInitial copy display Display PanelDisplays and Key Operations Document Server initial display Function menuFunction List Based on Options Set the paper of the same size KL in the paper trays Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the ma- chinePress the operation switch to make the On indicator goes on Turning On the PowerTurning Off the Power Turning Off the Main Power Changing Modes Metric version OriginalsInch version Non-recommended originals for the document feederSizes difficult to detect Sizes Detectable by the Auto Paper SelectDocument feeder Missing Image AreaExposure glass Recommended Paper Sizes and Types Copy PaperIfy the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Paper Storage Non-recommended PaperUsed Toner TonerToner Storage Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previ- ous settings remaining Set your originalsSystem Reset Setting Originals on the Exposure Glass Setting OriginalsLift the platen cover or the docu- ment feeder Lower the platen cover or docu- ment feederOriginal Orientation Setting Originals Document FeederStandard Orientation TurnBatch mode Setting Special OriginalsPress the key Press the OK key Press the Batch keyMixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Make sure that the Auto Image Den- sity key is selected Press the Lighter or Darker key to adjust the densitySelecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select Make sure that the Auto Paper Select key is selected Auto Paper SelectRotated copy Select the paper tray Auto Reduce/EnlargePress the Auto Reduce/Enlarge key Stack Sort/Stack/StapleSort Press the Sort or Rotate Sort key Shift SortEnter the number of copy sets with the number keys When the 2 Tray Finisher is installedSet the original, then press the Start key After all originals are scanned, press the # keyEnter the number of copies with the number keys StackShift Stack Set the original in the same direction as the first one Staple Stapling position and original setting Tray Finisher Sheet FinisherSort/Stack/Staple Select one of the stapling positions⇒ P.51 Stapling position and original setting To Remove the Paper from the Staple Unit When Memory Reaches 0%Press the No key to resume scanning Press the Yes keyHoles PunchPunch hole positions Select the Punch position Punchable paper sizes are as followsEnter the number of copy sets with the number keys Extender Open the bypass tray Adjust the guides to copy paper sizeCopying from the Bypass Tray Press the # key When copying onto custom size paperCopying Press the OK key Set your originals and press the Start key When Copying onto OHP Transparencies or Thick PaperSelect OHP Sheet or Thick Paper Programs Storing Your SettingsStoring a Program Deleting a ProgramDeleting a Program Make sure the program settingsRepeat steps E and F in Storing a Program Press the Do not Register keyRecalling a Program Press the Copy key Set up the next copy job Job PresetCancel key Press the To Printing keyOther Functions Energy Saver Mode Interrupt CopyTo interrupt an original being fed Press the Interrupt keySample Copy Original BeeperTo interrupt copying after all originals have been fed Set your original Press the Start keyPress the Change Quantity key Press the Clear/Stop key when Copying is displayedPress the Continue key Ratio % Paper size Preset Reduce/EnlargePress the Enlarge or Reduce key Create Margin modePress the Reduce/Enlarge key Zoom Adjust the ratios with the n or o keyEnter the ratio Press the Mag. Ratio keyEnter the desired ratio with the number keys Press the Reduce/Enlarge key Press the Specifid Ratio key Size MagnificationPress the OK key Set your original, then press the Start key