Savin 2245 Original Beeper, Sample Copy, To interrupt copying after all originals have been fed

Page 82

AdonisC2_ENcopy122F_FM.book Page 69 Thursday, February 15, 2001 3:23 PM

Other Functions

To interrupt copying after all originals have been fed

A Press the {Interrupt} key.

The Interrupt indicator goes on.

Note

❒Copying will not stop yet.

B Set your original.

C Press the {Start} key.

The machine stops the original job and starts copying your original.

D When copying is complete, re- move your originals and copies.

E Press the {Interrupt} key again.

The Interrupt indicator goes off.

The previous copy job settings will be restored and the machine will continue copying from where it left off.

Original Beeper

The beeper sounds and an error mes- sage is displayed when you leave your originals on the exposure glass after copying.

Note

❒To cancel this function, ⇒ “Tone:

Original remains” in P.215 “Gener- al Features 2/4”.

Sample Copy

Use this function to check a copy set before making a long copy run.

Limitation

❒This function can be used only

when the Sort function has been
when the Sort function has been	2
turned on.

A Select Sort and any other func- tions, then enter the number of copy sets to be made.

B Set the originals.

C Press the {Sample Copy} key.

One copy set is delivered for proof copying.

D After checking the finish, press the [Print] key if the sample is ac- ceptable.

The number of copies made is the number you specified minus one for the proof copy.

Note

❒If you press the [Suspend] key after checking the finish, return to step A to adjust the copy set- tings as necessary. You can change the settings for Staple, Punch, Duplex, Copy Orienta- tion, Stamp, Margin Adjust, and Cover/Slip Sheet. However, de- pending on the combinations of functions, some settings might not be changed.

❒You cannot use the Sample Copy function after changing the settings.

69

Image 82

Contents Zdsh000j.eps ⇒ P.237 Power Connection Means Power ON. c means Stand by FCC RequirementsSafety Information Safety During OperationPage Preparation How to Read this ManualSymbols LimitationTable of Contents Basic Functions Job Preset Other FunctionsPreset Reduce/Enlarge Sort/Stack/Staple116 101112 121156 149151 161206 198202 207238 235236 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server 103 ⇒ P.39⇒ P.37 ⇒ P.77Guide To Components Bypass tray Right side cover Ventilation holeTo copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Options Control Panel Number keys Function Status indicatorClear/Stop key Function keysDisplays and Key Operations Display PanelInitial copy display Function menu Document Server initial displayFunction List Based on Options Set the paper of the same size KL in the paper trays Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the ma- chineTurning Off the Power Turning On the PowerPress the operation switch to make the On indicator goes on Turning Off the Main Power Changing Modes Inch version OriginalsMetric version Non-recommended originals for the document feederSizes Detectable by the Auto Paper Select Sizes difficult to detectExposure glass Missing Image AreaDocument feeder Copy Paper Recommended Paper Sizes and TypesIfy the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Non-recommended Paper Paper StorageToner Storage TonerUsed Toner Basics Make sure that there are no previ- ous settings remaining Basic ProcedureMake sure that the machine is in Copy mode Set your originalsSystem Reset Lift the platen cover or the docu- ment feeder Setting OriginalsSetting Originals on the Exposure Glass Lower the platen cover or docu- ment feederStandard Orientation Setting Originals Document FeederOriginal Orientation TurnPress the key Press the OK key Setting Special OriginalsBatch mode Press the Batch keyMixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Press the Lighter or Darker key to adjust the density Make sure that the Auto Image Den- sity key is selectedSelecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Auto Paper Select Make sure that the Auto Paper Select key is selectedRotated copy Press the Auto Reduce/Enlarge key Auto Reduce/EnlargeSelect the paper tray Sort/Stack/Staple StackSort Shift Sort Press the Sort or Rotate Sort keySet the original, then press the Start key When the 2 Tray Finisher is installedEnter the number of copy sets with the number keys After all originals are scanned, press the # keyShift Stack StackEnter the number of copies with the number keys Set the original in the same direction as the first one Staple Stapling position and original setting Sheet Finisher Tray FinisherSelect one of the stapling positions Sort/Stack/Staple⇒ P.51 Stapling position and original setting Press the No key to resume scanning When Memory Reaches 0%To Remove the Paper from the Staple Unit Press the Yes keyPunch HolesPunch hole positions Punchable paper sizes are as follows Select the Punch positionEnter the number of copy sets with the number keys Copying from the Bypass Tray Open the bypass tray Adjust the guides to copy paper sizeExtender When copying onto custom size paper Press the # keyCopying Select OHP Sheet or Thick Paper When Copying onto OHP Transparencies or Thick PaperPress the OK key Set your originals and press the Start key Storing a Program Storing Your SettingsPrograms Deleting a ProgramRepeat steps E and F in Storing a Program Make sure the program settingsDeleting a Program Press the Do not Register keyRecalling a Program Cancel key Job PresetPress the Copy key Set up the next copy job Press the To Printing keyTo interrupt an original being fed Energy Saver Mode Interrupt CopyOther Functions Press the Interrupt keyTo interrupt copying after all originals have been fed Original BeeperSample Copy Set your original Press the Start keyPress the Continue key Press the Clear/Stop key when Copying is displayedPress the Change Quantity key Preset Reduce/Enlarge Ratio % Paper sizePress the Reduce/Enlarge key Create Margin modePress the Enlarge or Reduce key Enter the ratio Adjust the ratios with the n or o keyZoom Press the Mag. Ratio keyEnter the desired ratio with the number keys Size Magnification Press the Reduce/Enlarge key Press the Specifid Ratio keyPress the OK key Set your original, then press the Start key