• For example, the scanner shows the following displays
Tone SQ on, | Tone SQ on, |
| Tone SQ on, | ||||
CTCSS 123.0 Hz set | DCS 325 set |
| No CTCSS & DCS set | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tone Search, | Tone Search, | Tone Search, |
CTCSS 67.0 Hz detected | DCS 023 detected | no signal present |
•If the delay feature
Additional Menu Options for Searching
Each of these additional menu options apply to all banks with search ranges entered. If there is a bank that you do not want an option to apply, then simply press the bank number on the numerical keypad. You will see the bank number that you have selected, disappears from
the display. (For more information on these options refer to the “Menu Descriptions” section and “Additional Features” section.
Options:
RECORD (for more information see page 9)
1.Press MENU.
2.Press ▲ or ▼ to select SEARCH EVENT and then press E.
3.Press ▲ or ▼ to select RECORD and then press E.
4.Set to ON using ▲, ▼ or VFO and pressing E. LINE is lit on the display.
ATTENUATOR (for more information see page 22)
1.Press MENU.
2.Press ▲ or ▼ to select SEARCH EVENT and then press E.
3.Press ▲ or ▼ to select ATTENUATOR and then press E.
4.Set to ON using ▲, ▼ or VFO and pressing E. ATT is lit on the display.
DELAY
Refer to page 22.
30