Panasonic DP-135FP appendix Sleep Delay Timer

Fax Parameters

No.	Parameter	Setting	Setting			Comments
		Number
34	ENERGY SAVE TIMER	1	5 min.	To reduce the power consumption in standby, your machine is
				designed to power down to the Energy Saver Mode and Sleep
		*2	15
				Mode after a specified period of inactivity. You may change the
				delay time to enter into each mode as required.
		3	30
		4	60	Energy Saver Mode: Saves energy by consuming less power than
						when in standby mode by turning off the fuser
		5	90
						unit after a specified time.
		6	120
				Sleep Mode:		This is the lowest power state the machine
		7	180
						enters after the specified time without
						actually turning off.
		8	240
	SLEEP DELAY TIMER	1	5 min.
		*2	30
		3	60
		4	90
		5	180
		6	240
35	DAYLIGHT TIME	1	Invalid	Selecting whether the clock adjusts for Daylight Saving Time
				automatically. The built-in clock will advance 1 hour at 2:00 am on
				the first Sunday in April and fallback 1 hour at 2:00 am on the last
		*2	Valid
				Sunday in October.
36	RING PATTERN	*1	Invalid	All ring patterns.
	(DRD)
		2	Valid	Select a ring pattern for automatic answering.
	(See Note 2)
				1: A	Standard ring pattern.
				2: B	Double ring pattern.
				3: C	Triple ring pattern (Short-Short-Long).
				4: D	All other triple ring pattern, except the type C
					described above.
37	RCV TO MEMORY			Enter a 4-digit password used to print out the received document
			(----)	in memory by using F8-2 (RCV TO MEMORY). When F8-2 is set
				to On, this parameter will not be shown on the LCD display. (See
				page 67)
39	PIN CODE ACCESS	*1	None	Selecting the access method (Prefix or Suffix) to dial a number
				with PIN Code. (See page 72)
		2	Suffix
		3	Prefix
52	DIAGNOSTIC		(----)	Setting the password for Remote Diagnostic Mode. Please ask
	PASSWORD			your Panasonic Authorized Dealer for details.
53	SUB-ADDRESS		(----)	Setting a 20-digit password for secured sub-address
	PASSWORD			communication.

Continued on the next page.

36