Panasonic WX-C3010 manual SP Level Onday

!0Auxiliary Speaker Volume (AUX, SP)

This control sets the output level of auxiliary speaker.

!1Auxiliary Microphone Volume (AUX, MIC)

This control sets the input level of gooseneck micro- phone.

!2Vehicle Detector Beep Volume (BEEP)

This control sets the vehicle detection beep tone for the Order Taker or the All-in-One Headset.

!3POS Audio Volume (POS AUDIO)

This control sets the input level of POS audio.

[OPERATIONAL SETTING]

OUTSIDE		AUX	BEEP	POS
SP	MIC	SP	MIC	AUDIO

	OPERATIONAL SETTING
SPEED	BEEP	OUTSIDE	V/DET	T/P
TEAM	DAY/NIGHT	SP LEVEL	OVERRIDE	RELEASE
	ON:DAY	ON:DAY

!5 !7 !9 @1 @2

!4 !6 !8 @0

!4Speed Team Indicator (yellow) (SPEED TEAM)

This indicates that the speed team mode is on.

!5Speed Team On/Off Button

This button turns the speed team mode on and off.

!6Vehicle Detector Beep Day/Night Indicator (yellow) (BEEP DAY/NIGHT ON:DAY)

This indicates that the vehicle detector beep has select- ed DAY.

!7Vehicle Detector Beep Day/Night Button

This button turns the vehicle detector beep DAY and

NIGHT.

Day mode: Disables the vehicle detector beep on the other lane.

Night mode: Reduces the volume of the vehicle detec- tor beep on the other lane.

!8Outside Speaker Level Indicator (yellow) (OUTSIDE

SP LEVEL ON:DAY)

This indicates that the outside speaker level has select- ed normal level.

!9Outside Speaker Level DAY/NIGHT Button

This button turns the outside speaker level normal level and 50% level.

@0Vehicle Detector Normal/Override On Indicator (yel- low) (V/DET OVERRIDE)

This indicates that the vehicle detector has selected Override On.

@1Vehicle Detector Normal/Override On Button

This button turns the vehicle detector Normal and Override On.

NORMAL: The vehicle detector turns on only when vehi- cle is detected at the menu board.

OVERRIDE ON: The vehicle detector is always turned on.

@2Talk/Page Release Button (T/P RELEASE)

The button is used to release temporarily the talk/page communication of the Order Taker or All-in-One Headset.

[GREETER]

	@4		@9
	@3	@7@8	#0
	GREETER
	ON	START	REC
		DELAY
@6	SELECT		#1
		VOLUME
1	2	DOWN	UP
@5
	HEADSET	DESTINATION
PLAYBACK		AUX	HEADSET

#2 #4 #5

#3 #6

@3Greeter On/Off Indicator (yellow) (GREETER, ON)

This indicates that the greeter function has selected on.

@4Greeter On/Off Button (GREETER, ON)

This button turns the greeter function on and off.

@5Greeter Memory Select and Output Level Indicator (green/yellow/red) (SELECT)

This indicates that the greeter memory has been select- ed. Each memory has a capacity to record a message for 16 seconds at the maximum.

1:This indicates that the greeter memory has selected

1.(The message of “Please pull forward” is a factory default.)

2:This indicates that the greeter memory has selected

2.

Off: Greeter is Off.

Green: When the greeter output level set in LOW, the indicator lights up in green.

Yellow: When the greeter output level set in MID, the indicator lights up in yellow.

Red: When the greeter output level set in HIGH, the indi- cator lights up in red.

@6Greeter Memory Select Button (SELECT)

This button selects either of the greeter memories.

10