5.When the delay is necessary for the message
When the customer approaches the menu board, the message is output after a delay of 2 seconds. Press the Greeter Start Delay Button of the Center Module. The Greeter Start Delay Indicator will light in yellow.
●Vehicle Detector BEEP DAY/NIGHT
In the case of Double
Day/Night setup can be made by button operation at the front panel of this unit.
When the Day mode is set, the Beep Day/Night indicator of the center module will light in yellow. When the Beep Day/Night button is pressed, the Night mode is assumed and this indicator will disappear.
| OPERATIONAL SETTING |
| ||
SPEED | BEEP | OUTSIDE | V/DET | T/P |
TEAM | DAY/NIGHT | SP LEVEL | OVERRIDE | RELEASE |
| ON:DAY | ON:DAY |
|
|
Vehicle Detector Beep DAY/NIGHT Button
Note:
•If POS Remote is set for ON, you have to note that no button operation of the Beep Day/Night is possible at the center module.
DAY mode: When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the beep A. If the vehicle detector is on of the lane B, you will not hear the beep B.
NIGHT mode: When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the beep A. If the vehicle detector is on of the lane B, you will hear the low level beep B. When both vehicle detectors are on, you will alternately hear the beep A and the low level beep B.
DAY/NIGHT | Vehicle detector | Order Taker and | |||
Lane A is ON | Lane B is ON | A | B | ||
| |||||
|
|
|
|
| |
DAY | b | – | Beep A | – | |
– | b | – | Beep B | ||
| b | b | Beep A | Beep B | |
| b | – | Beep A | Low level Beep A | |
NIGHT | – | b | Low level Beep B | Beep B | |
| b | b | Beep A + | Beep B + | |
| Low level beep B (*1) | Low level beep A (*2) | |||
|
|
|
|
| |
*1: When you press the button T1, the beep will change to low level beep B only.
*2: When you press the button T1, the beep will change to low level beep A only.
●Outside Speaker Level DAY/NIGHT
The Outside Speaker level can be set up.
Day/Night setup can be made by button operation at the front panel of this unit.
| OPERATIONAL SETTING |
| ||
SPEED | BEEP | OUTSIDE | V/DET | T/P |
TEAM | DAY/NIGHT | SP LEVEL | OVERRIDE | PELEASE |
| ON:DAY | ON:DAY |
|
|
When the Day mode is set, the Outside SP Level indicator of the center module will light in yellow. When the Outside SP Level button is pressed, the Night mode is assumed and this indicator will disappear.
DAY mode: Normal level
NIGHT mode: 50% level (Attenuation)
Note:
•If POS Remote is set for ON, you have to note that no button operation of the Outside Speaker Level is possi- ble at the center module.
Outside Speaker Level DAY/NIGHT Button
14