Panasonic PT-L592U manual Standard setting-up positions, Standard setting-up dimensions

Standard setting-up positions

After determining the appropriate position for the projector by referring to the illustrations and standard setting-up dimensions given below, set up the projector. The distance L from the projector to the screen and the height H do not vary, regardless of whether the projector is being used in the floor, ceiling, front or rear positions.

L

Projected image

	L
Lower edge of
projected image	L: Projection distance
	H: Height from lower edge of
	projected image to center of lens

L

Projected image

Standard setting-up dimensions

Because the projector uses a X 1.5 electronic zoom lens, it is possible to adjust the projection distance. And because there is also a function provided for adjusting the height of the lens, the height of the projector can also be adjusted relative to the position of the screen. For details, refer to pages 14 and 15.

Projection size		Projection distance (L)					Height from lower edge of
	Minimum			Maximum			projected image to center of lens (H)
30	3'3”	(1.0	m)	4'11" (1.5 m)			0–18"	(0–0.457	m)
40	4'7"	(1.4	m)	6'6"	(2.0	m)	0–24"	(0–0.610	m)
60	6'10" (2.1 m)			10'2"	(3.1	m)	0–36"	(0–0.914	m)
80	9'2"	(2.8	m)	13'9"	(4.2	m)	0–48"	(0–1.219	m)
100	11'9"	(3.6	m)	17'4"	(5.3	m)	0–60"	(0–1.524	m)
150	17'8"	(5.4	m)	26'2"	(8.0	m)	0–90"	(0–2.286	m)
200	23'7"	(7.2	m)	35'1"	(10.7	m)	0–120" (0–3.048 m)
250	29'6"	(9.0	m)	43'11" (13.4 m)			0–150" (0–3.810 m)
300	35'5"	(10.8 m)		53'1"	(16.2	m)	0–180" (0–4.572 m)

NOTE:

In addition, if the projector is not completely vertical with respect to the screen and horizontal with respect to the floor, distortion of the projected image will result. Adjust the projector horizon by the procedure given on page 15. The values in the table shown above are approximate.

-13-