Panasonic PT-L592U manual Adjusting the position of the projected picture

Page 15
inch (±10.1 mm). However, the

Adjusting the position of the projected picture

The vertical position of the projected picture can be adjusted by changing the height of the projection lens using the LENS SHIFT dial which is on top of the projector.

After determining the projection distance and the setting-up position, adjust the vertical position of the projected picture by carrying out the following procedure.

Press the LENS SHIFT dial on top of the projector.

The dial will pop up and it will be possible to turn it to

 

make adjustments.

LENS SHIFT dial

 

If the LENS SHIFT dial is turned clockwise, the position of the projected image will be raised.

LENS SHIFT dial

Solid line: Original picture position

Dotted line: Picture position after adjustment

If the LENS SHIFT dial is turned counterclockwise, the position of the projected image will be lowered.

LENS SHIFT dial

Press the LENS SHIFT dial on top of the projector.

The dial will pop back in again and adjustment will no

 

longer be possible.

Lens adjustment dial

 

NOTE:

The height of the projection lens can be adjusted within a range of

adjustment range for the position of the projected picture will vary depending on the size of the projected picture.

-14-

Image 15
Contents LCD Projector Contents FeaturesDear Panasonic Customer Important Safety Notice Precautions with regard to safety Setting-upWhen using the projector Do not place any heavy objects on top of the projector If problems occur during useCleaning and maintenance Take particular care when replacing the lamp unitPrecautions on handling Wipe the cabinet with a soft, dry clothAbout condensation Side view Remote control unitLocation and function of each part Front viewTop and front ProjectorSide terminal board Back, bottom and right viewBefore using the remote control unit Inserting the batteriesDo not do any of the following If facing the remote control unit toward the screen Operating range of the remote control unitPower button Main Power switch Turning the power on and offTurning on the power Turning off the powerFlexible translucent screen Rigid-type translucent screen Screen characteristics referenceScreen requirements Silver screen Beaded screenStandard setting-up positions Standard setting-up dimensionsProjection distance L Height from lower edge Minimum Adjusting the position of the projected picture Adjuster button Adjustable legs Setting the projector up horizontallyRetracting the adjustable legs Adjustment procedureAdjustment procedure for direct adjustment Adjusting the lensRear mounting Setting-up positions and changing the projection methodSetting procedure Front mountingChanging the input source Basic operationNo. of dots Switching the signal mode during RGB signal inputAdjusting the volume System format selection for S-VIDEO Video input signalsRemote control unit Turning off the soundDisplaying the on-screen menu Adjusting the picture to the desired setting BAL R BAL G BAL B Adjusting the white balanceAdjustment procedure for volume adjustment Adjusting the sound to the desired settingAdjustment procedure for horizontal position adjustment Adjusting the picture positionBottom blanking correction for the V-BLK-B Adjusting the blankingLeft-side blanking correction for the H-BLK-L Top blanking correction for the V-BLK-TAdjustment func Adjusting the horizontal amplitudeWhen increasing the horizontal amplitude When decreasing the horizontal amplitudeAbout dot clock adjustment Adjusting the dot clock frequencyAdjusting the clock phase Disabling the Power button of the remote control unit Using other useful functionsChanging the on-screen display language to another language Using the countdown timerUsing the lens retracting function Using the power save functionSetting procedure System configuration example Example of connection to audio-visual equipmentVCR Example of connection to a computer Computer Audio systemComputer for Pointer Click 1 button Wireless mouseExample of connection OperationBasic format Using the serial connectorPin layout and signal names for Serial connector Communication settingsAVL Control commandsCable specifications POFPossible cause IndicatorsCleaning the air filter Install the air filter cover Clean the air filter and the air filter clampsReplacing the lamp unit Lamp unit replacement periodReplacement procedure Lamp unit cover Fixing screw for the lamp unit coverFixing screw for the lamp unit Page Problem Before asking for service, check the following pointsRGB HD/SYNC Audio Video Audio in L-R SpecificationsFCC Trademark AcknowledgementsDimensions