Panasonic PT-L592U Turning off the sound, Displaying the on-screen menu, Remote control unit

Page 22

Turning off the sound

If the MUTE button on the remote control unit is pressed, “MUTE” will be displayed on the screen as shown in the illustration below and the sound will be muted. If the MUTE button is pressed once more, the on-screen display will be cleared and the normal sound volume will be restored. The volume output level will remain displayed on the screen for approximately three seconds.

Remote control unit

NOTE:

 

If the MUTE button is pressed while the on-screen display

 

for another function is currently on the screen, the volume

 

will still be muted but the “MUTE” on-screen display will not

 

appear.

 

If the power supply is turned off or either of the VOL (+/-)

 

buttons is pressed, the mute setting will be canceled.

 

It is also possible to have the picture turn off together with

 

the sound when the MUTE button is pressed. Refer to page

 

32 for details on how to change this setting.

 

When the picture has been turned off in this way, the words

 

“PICTURE MUTE” will be displayed on the screen.

Displaying the on-screen menu

The menu screen can be displayed by pressing the MENU button on the projector control panel or the remote control unit.

Projector

Remote control unit

or

If the MENU button is pressed when there is not already an on-screen display, the MENU screen shown at left will be displayed.

NOTE:

If the MENU button is pressed while an on-screen display is already appearing, the on-screen display will return to the previously-displayed screen each time the MENU button is pressed. If it is pressed while the MENU screen shown at left is being displayed, the MENU screen will be cleared.

Resetting adjustment values to the factory pre-settings (standard values)

If the STD (Standard) button on the remote control unit is pressed while the PICTURE screen, POSITION screen, AUDIO screen or one of the individual adjustment screens is being displayed, the adjustment settings being displayed will be reset to the factory pre-settings.

Remote control unit

If the STD (Standard) button on the remote control unit is

 

pressed while the PICTURE screen, POSITION screen or

 

AUDIO screen is being displayed, the letters “STD” will be

 

displayed in yellow in the top-right corner of the screen and

 

all items displayed will be reset to the factory pre-settings.

 

NOTE:

 

However, the “TV-SYSTEM” and “SIGNAL MODE” settings

 

in the PICTURE screen and the “VOLUME” setting in the

 

AUDIO screen will not return to the factory pre-settings.

 

If the STD (Standard) button on the remote control unit is

 

pressed while one of the individual adjustment screens is

 

being displayed, the value and the bar display will be

 

appeared in yellow and only the item displayed will be reset

 

to the factory pre-setting.

 

-21-

Page 21 Page 23
Image 22
Page 21 Page 23
Contents LCD Projector Features ContentsDear Panasonic Customer Important Safety Notice Setting-up Precautions with regard to safetyWhen using the projector Take particular care when replacing the lamp unit If problems occur during useCleaning and maintenance Do not place any heavy objects on top of the projectorWipe the cabinet with a soft, dry cloth Precautions on handlingAbout condensation Front view Remote control unitLocation and function of each part Side viewProjector Top and frontBack, bottom and right view Side terminal boardInserting the batteries Before using the remote control unitDo not do any of the following Operating range of the remote control unit If facing the remote control unit toward the screenTurning off the power Turning the power on and offTurning on the power Power button Main Power switchSilver screen Beaded screen Screen characteristics referenceScreen requirements Flexible translucent screen Rigid-type translucent screenStandard setting-up dimensions Standard setting-up positionsProjection distance L Height from lower edge Minimum Adjusting the position of the projected picture Adjustment procedure Setting the projector up horizontallyRetracting the adjustable legs Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentFront mounting Setting-up positions and changing the projection methodSetting procedure Rear mountingBasic operation Changing the input sourceSwitching the signal mode during RGB signal input No. of dotsSystem format selection for S-VIDEO Video input signals Adjusting the volumeTurning off the sound Remote control unitDisplaying the on-screen menu Adjusting the picture to the desired setting Adjusting the white balance BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentAdjusting the picture position Adjustment procedure for horizontal position adjustmentTop blanking correction for the V-BLK-T Adjusting the blankingLeft-side blanking correction for the H-BLK-L Bottom blanking correction for the V-BLK-BWhen decreasing the horizontal amplitude Adjusting the horizontal amplitudeWhen increasing the horizontal amplitude Adjustment funcAdjusting the dot clock frequency About dot clock adjustmentAdjusting the clock phase Using other useful functions Disabling the Power button of the remote control unitUsing the countdown timer Changing the on-screen display language to another languageUsing the power save function Using the lens retracting functionSetting procedure Example of connection to audio-visual equipment System configuration exampleVCR Computer Audio system Example of connection to a computerComputer for Operation Wireless mouseExample of connection Pointer Click 1 buttonCommunication settings Using the serial connectorPin layout and signal names for Serial connector Basic formatPOF Control commandsCable specifications AVLIndicators Possible causeCleaning the air filter Clean the air filter and the air filter clamps Install the air filter coverLamp unit replacement period Replacing the lamp unitLamp unit cover Fixing screw for the lamp unit cover Replacement procedureFixing screw for the lamp unit Page Before asking for service, check the following points ProblemSpecifications RGB HD/SYNC Audio Video Audio in L-RTrademark Acknowledgements FCCDimensions
Top Page Image Contents