Panasonic PT-L592U manual

Page 44

7.Insert the power cord plug into the wall outlet and then press the MAIN POWER switch on the front of the projector to turn on the power.

NOTE:

If the power does not turn on when the MAIN POWER switch is pressed, turn the MAIN POWER switch off again and check that the lamp unit and the lamp unit cover are securely installed. Then turn the MAIN POWER switch back on.

8.Press the POWER button on the projector or remote control unit so that a picture is projected onto the screen.

9.-(1)Press the MENU button to display the MENU screen.

(2)Press the “ ” and “ ” buttons to select “OPTION”.

10.-(1)Press the “<” and “>” buttons to display the OPTION screen. (2)Press the “ ” and “ ” buttons to select “SET UP”.

11.-(1)Press the “>” and “>” buttons to display the SET UP screen. (2)Press the “ ” and “ ” buttons to select “LAMP RUNTIME”.

The cumulative usage time of the current lamp unit will be displayed on the screen.

(3)Press the “<” or “>” button on the projector control panel continuously for three seconds or more. (The “LAMP RUNTIME” display will change to “TIME RESET”.)

NOTE:

The “<” and “>” buttons on the remote control unit cannot be used at this time. (4)While the SET UP screen (the screen showing “TIME RESET”) is being

displayed, turn off the power. This will reset the cumulative usage time for the lamp unit.

NOTE:

If any other buttons are pressed while “TIME RESET” is being displayed, the display will return to “LAMP RUNTIME” and the button pressed will take effect.

-43-

Image 44

Contents LCD Projector Dear Panasonic Customer ContentsFeatures Important Safety Notice When using the projector Precautions with regard to safetySetting-up If problems occur during use Cleaning and maintenanceTake particular care when replacing the lamp unit Do not place any heavy objects on top of the projectorAbout condensation Precautions on handlingWipe the cabinet with a soft, dry cloth Remote control unit Location and function of each partFront view Side viewProjector Top and frontBack, bottom and right view Side terminal boardDo not do any of the following Before using the remote control unitInserting the batteries Operating range of the remote control unit If facing the remote control unit toward the screenTurning the power on and off Turning on the powerTurning off the power Power button Main Power switchScreen characteristics reference Screen requirementsSilver screen Beaded screen Flexible translucent screen Rigid-type translucent screenProjection distance L Height from lower edge Minimum Standard setting-up positionsStandard setting-up dimensions Adjusting the position of the projected picture Setting the projector up horizontally Retracting the adjustable legsAdjustment procedure Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentSetting-up positions and changing the projection method Setting procedureFront mounting Rear mountingBasic operation Changing the input sourceSwitching the signal mode during RGB signal input No. of dotsSystem format selection for S-VIDEO Video input signals Adjusting the volumeDisplaying the on-screen menu Remote control unitTurning off the sound Adjusting the picture to the desired setting Adjusting the white balance BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentAdjusting the picture position Adjustment procedure for horizontal position adjustmentAdjusting the blanking Left-side blanking correction for the H-BLK-LTop blanking correction for the V-BLK-T Bottom blanking correction for the V-BLK-BAdjusting the horizontal amplitude When increasing the horizontal amplitudeWhen decreasing the horizontal amplitude Adjustment funcAdjusting the clock phase About dot clock adjustmentAdjusting the dot clock frequency Using other useful functions Disabling the Power button of the remote control unitUsing the countdown timer Changing the on-screen display language to another languageUsing the power save function Using the lens retracting functionSetting procedure VCR System configuration exampleExample of connection to audio-visual equipment Computer for Example of connection to a computerComputer Audio system Wireless mouse Example of connectionOperation Pointer Click 1 buttonUsing the serial connector Pin layout and signal names for Serial connectorCommunication settings Basic formatControl commands Cable specificationsPOF AVLIndicators Possible causeCleaning the air filter Clean the air filter and the air filter clamps Install the air filter coverLamp unit replacement period Replacing the lamp unitFixing screw for the lamp unit Replacement procedureLamp unit cover Fixing screw for the lamp unit cover Page Before asking for service, check the following points ProblemSpecifications RGB HD/SYNC Audio Video Audio in L-RTrademark Acknowledgements FCCDimensions