Panasonic PT-L592U Adjusting the horizontal amplitude, When increasing the horizontal amplitude

Page 28

Adjusting the horizontal amplitude

When VIDEO/S-VIDEO signals are being input, the horizontal amplitude of the picture can be adjusted. Carry out this adjustment by following the procedure given below. (This is only effective when VIDEO/S-VIDEO signals are being input.)

Adjustment procedure

1.Press the MENU button to display the menu screen.

2.Press the “ ” and “ ” buttons to select “POSITION”.

3.Press the “<” and “>” buttons to display the POSITION screen.

NOTE:

If the STD (Standard) button is pressed while the POSITION screen at right is being displayed, the letters “STD” will be displayed in yellow in the top-right corner of the screen and all items displayed will be reset to the factory pre-settings. Furthermore, the values and bar displays for items which have returned to the factory pre- settings will be displayed in yellow.

4. Press the “ ” and “ ” buttons to select “H-SIZE”.

5.Press the “<” and “>” buttons to display the H-SIZE individual adjustment screen.

6.Continue pressing the “<” and “>” buttons to adjust the H-SIZE setting. The current setting will be displayed on the screen by numerals and a bar.

The adjustment range is between 0 and 63.

	Adjustment func-
	tion display
	Numeric adjustment level display
	Bar display
<When increasing the horizontal amplitude>
Press the “>” button.	The picture area will become wider in the
	horizontal direction.

<When decreasing the horizontal amplitude>

Press the “<” button.	The picture area will become narrower in the
	horizontal direction.

NOTE:

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the POSITION screen.

Press the MENU button to return to the POSITION screen or to clear the MENU screen.

If the STD (Standard) button is pressed while one of the individual adjustment screens is being displayed, the value and the bar display will be appeared in yellow and only the item displayed will be reset to the factory pre- setting.

-27-

Image 28

Contents LCD Projector Features ContentsDear Panasonic Customer Important Safety Notice Setting-up Precautions with regard to safetyWhen using the projector If problems occur during use Cleaning and maintenanceTake particular care when replacing the lamp unit Do not place any heavy objects on top of the projectorWipe the cabinet with a soft, dry cloth Precautions on handlingAbout condensation Remote control unit Location and function of each partFront view Side viewProjector Top and frontBack, bottom and right view Side terminal boardInserting the batteries Before using the remote control unitDo not do any of the following Operating range of the remote control unit If facing the remote control unit toward the screenTurning the power on and off Turning on the powerTurning off the power Power button Main Power switchScreen characteristics reference Screen requirementsSilver screen Beaded screen Flexible translucent screen Rigid-type translucent screenStandard setting-up dimensions Standard setting-up positionsProjection distance L Height from lower edge Minimum Adjusting the position of the projected picture Setting the projector up horizontally Retracting the adjustable legsAdjustment procedure Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentSetting-up positions and changing the projection method Setting procedureFront mounting Rear mountingBasic operation Changing the input sourceSwitching the signal mode during RGB signal input No. of dotsSystem format selection for S-VIDEO Video input signals Adjusting the volumeTurning off the sound Remote control unitDisplaying the on-screen menu Adjusting the picture to the desired setting Adjusting the white balance BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentAdjusting the picture position Adjustment procedure for horizontal position adjustmentAdjusting the blanking Left-side blanking correction for the H-BLK-LTop blanking correction for the V-BLK-T Bottom blanking correction for the V-BLK-BAdjusting the horizontal amplitude When increasing the horizontal amplitudeWhen decreasing the horizontal amplitude Adjustment funcAdjusting the dot clock frequency About dot clock adjustmentAdjusting the clock phase Using other useful functions Disabling the Power button of the remote control unitUsing the countdown timer Changing the on-screen display language to another languageUsing the power save function Using the lens retracting functionSetting procedure Example of connection to audio-visual equipment System configuration exampleVCR Computer Audio system Example of connection to a computerComputer for Wireless mouse Example of connectionOperation Pointer Click 1 buttonUsing the serial connector Pin layout and signal names for Serial connectorCommunication settings Basic formatControl commands Cable specificationsPOF AVLIndicators Possible causeCleaning the air filter Clean the air filter and the air filter clamps Install the air filter coverLamp unit replacement period Replacing the lamp unitLamp unit cover Fixing screw for the lamp unit cover Replacement procedureFixing screw for the lamp unit Page Before asking for service, check the following points ProblemSpecifications RGB HD/SYNC Audio Video Audio in L-RTrademark Acknowledgements FCCDimensions