Precautions with regard to safety
WARNING
Setting-up
Do not install this projector in a place which is not strong enough to take the projector’s full weight.
If the installation location is not strong enough, the projector may fall down, which could cause severe injury and/or damage.
Ask a qualified technician to carry out installation work such as installing the projector in the ceiling.
If installation is not carried out correctly, it can cause injury or electric shocks to occur.
When using the projector
Do not place the projector on top of surfaces which are sloped or unstable.
The projector may fall down or tip over.
Do not place any objects on top of the projector.
If water spills onto the projector or foreign objects get inside it, a
Do not cover the air filter and the air outlet.
Doing so may cause the projector to overheat, which can cause fire or damage to the projector.
Do not stick any foreign objects into the projector.
Do not insert any metal objects or flammable objects into the ventilation holes or drop them onto the projector, as doing so can cause fire or electric shocks to occur.
Do not remove the cover or modify it in any way.
High voltages which can cause severe electric shocks are present inside the projector. For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not use any type of power cable other than the one supplied with the projector.
Use a cable with a
Do not spill water on the projector.
This can cause fire or electric shocks to occur.
Securely insert the power cord plug as far as it will go.
If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
Doing so may cause electric shocks to occur.
Do not do anything that might damage the power cable.
Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause fires and electric shocks to occur. If the power cable becomes damaged, have it repaired at an Authorized Service Center.
Clean the power cable regularly to prevent it from becoming covered in dust.
If dust builds up on the power cord plug, the resultant humidity can damage the insulation, which could result in fire. Pull the power cord out from the wall outlet and wipe it with a dry cloth.
If not using the projector for an extended period of time, pull the power cord plug out from the wall outlet.
- 3 -