Panasonic PT-L592U manual Setting procedure

Page 33

Setting the screen color when no signal is input and during picture muting

The projector can be set to project either a solid blue image or a solid black image onto the screen if nothing is connected to the projector’s input terminals, or if equipment is connected but no signal is being input from it. This setting is also effective when picture muting is active and when the countdown timer is running.

At the time of shipment from the factory, the color is set to “BLUE”.

Setting procedure

1. Press the MENU button to display the MENU screen. 2. Press the “ ” and “ ” buttons to select “OPTION”.

3.Press the “<” and “>” buttons to display the OPTION screen.

4.Press the “ ” and “ ” buttons to select “MUTE SETTING”.

5.Press the “<” and “>” buttons to display the MUTE SETTING screen.

6.Press the “ ” and “ ” buttons to select “BACK COLOR”.

7.Press the “<” and “>” buttons to change the setting to “BLUE” or “BLACK”.

This will set the color to be projected when no signal is being input.

NOTE:

If a signal that the projector cannot recognize is input, the projector will consider this to be no signal.

Press the MENU button to clear the setting screen and the MENU screen.

Using the MUTE remote control unit button to turn off both sound and picture

At the time of shipment from the factory, the MUTE button on the remote control unit is set so that only the sound is muted when the button is pressed. If you would like the picture to be muted along with the sound, set the PICTURE MUTE function to “ON” by the following procedure.

Setting procedure

The procedure below starts from the MUTE SETTING screen.

1.Press the “ ” and “ ” buttons to select “PICTURE MUTE”.

2.Press the “<” and “>” buttons to change the setting to “ON”.

If the function is set to “ON”, the picture will be muted along with the sound when the MUTE button is pressed.

If the function is set to “OFF”, only the sound will be muted when the MUTE button is pressed. (Factory pre-setting)

NOTE:

Press the MENU button to clear the setting screen and the MENU screen.

When PICTURE MUTE is on, the color projected will be the same color as the

BACK COLOR setting.

-32-

Image 33

Contents LCD Projector Contents FeaturesDear Panasonic Customer Important Safety Notice Precautions with regard to safety Setting-upWhen using the projector Cleaning and maintenance If problems occur during useTake particular care when replacing the lamp unit Do not place any heavy objects on top of the projectorPrecautions on handling Wipe the cabinet with a soft, dry clothAbout condensation Location and function of each part Remote control unitFront view Side viewTop and front ProjectorSide terminal board Back, bottom and right viewBefore using the remote control unit Inserting the batteriesDo not do any of the following If facing the remote control unit toward the screen Operating range of the remote control unitTurning on the power Turning the power on and offTurning off the power Power button Main Power switchScreen requirements Screen characteristics referenceSilver screen Beaded screen Flexible translucent screen Rigid-type translucent screenStandard setting-up positions Standard setting-up dimensionsProjection distance L Height from lower edge Minimum Adjusting the position of the projected picture Retracting the adjustable legs Setting the projector up horizontallyAdjustment procedure Adjuster button Adjustable legsAdjustment procedure for direct adjustment Adjusting the lensSetting procedure Setting-up positions and changing the projection methodFront mounting Rear mountingChanging the input source Basic operationNo. of dots Switching the signal mode during RGB signal inputAdjusting the volume System format selection for S-VIDEO Video input signalsRemote control unit Turning off the soundDisplaying the on-screen menu Adjusting the picture to the desired setting BAL R BAL G BAL B Adjusting the white balanceAdjustment procedure for volume adjustment Adjusting the sound to the desired settingAdjustment procedure for horizontal position adjustment Adjusting the picture positionLeft-side blanking correction for the H-BLK-L Adjusting the blankingTop blanking correction for the V-BLK-T Bottom blanking correction for the V-BLK-BWhen increasing the horizontal amplitude Adjusting the horizontal amplitudeWhen decreasing the horizontal amplitude Adjustment funcAbout dot clock adjustment Adjusting the dot clock frequencyAdjusting the clock phase Disabling the Power button of the remote control unit Using other useful functionsChanging the on-screen display language to another language Using the countdown timerUsing the lens retracting function Using the power save functionSetting procedure System configuration example Example of connection to audio-visual equipmentVCR Example of connection to a computer Computer Audio systemComputer for Example of connection Wireless mouseOperation Pointer Click 1 buttonPin layout and signal names for Serial connector Using the serial connectorCommunication settings Basic formatCable specifications Control commandsPOF AVLPossible cause IndicatorsCleaning the air filter Install the air filter cover Clean the air filter and the air filter clampsReplacing the lamp unit Lamp unit replacement periodReplacement procedure Lamp unit cover Fixing screw for the lamp unit coverFixing screw for the lamp unit Page Problem Before asking for service, check the following pointsRGB HD/SYNC Audio Video Audio in L-R SpecificationsFCC Trademark AcknowledgementsDimensions