Panasonic PT-L592U manual Adjusting the picture to the desired setting

Page 23

Adjusting the picture to the desired setting

You can adjust the picture settings for any of the input signal sources selected according to the procedure on page 18. The items which can be adjusted vary depending on the type of input signal. The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.

Adjustment procedure <for the COLOR setting>

1. Press the MENU button to display the MENU screen. 2. Press the “ ” and “ ” buttons to select “PICTURE”.

3.Press the "<" and “>” buttons to display the PICTURE screen.

4.Press the " " and " " buttons to select “COLOR”.

NOTE:

If the STD (Standard) button is pressed while the PICTURE screen at right is being displayed, the letters “STD” will be displayed in yellow in the top-right corner of the screen and all settings other than the TV-SYSTEM setting will be reset to the factory pre-settings. Furthermore, the values and bar displays for items which have returned to the factory pre-settings will be displayed in yellow.

5.Press the "<" and ">" buttons to display the COLOR individual adjustment screen.

6.Continue pressing the “<” and ">" buttons to adjust the color. The current setting will be displayed on the screen by numerals and a bar.

The adjustment operation and the changes made will vary depending on which adjustment item is selected. Refer to the table below for details.

Adjustment function display

Adjustment Item

Button

Numeric adjustment level display

Bar display

Adjustment Details

Adjustment Range

Remarks

Press the ">" button.

COLOR

Press the “<” button.

Press the “>” button.

TINT

Press the “<” button.

Press the “>” button.

BRIGHT

Press the “<” button.

Press the ">" button.

CONTRAST

Press the “<” button.

Press the “>” button.

SHARPNESS

Press the “<” button.

NOTE:

The color becomes darker. The color becomes lighter. Flesh tones become greenish.

Flesh tones become reddish. The screen becomes brighter. The screen becomes darker.

The screen becomes brighter and the picture becomes darker.

The screen becomes darker and the picture becomes lighter.

The picture quality becomes sharper. The picture quality becomes softer.

Max. value 63 Min. value 0

Max. value 63 Min. value 0 Max. value 63 Min. value 0

Max. value 63

Min value 0

Max. value 63 Min. value 0

S-VIDEO/VIDEO only

NTSC, NTSC 4.43 (S- VIDEO/VIDEO)only

S-VIDEO/VIDEO only

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the PICTURE screen.

Press the MENU button to return to the PICTURE screen or to clear the MENU screen.

If the STD (Standard) button is pressed while one of the individual adjustment screens is being displayed, the value and the bar display will be appeared in yellow and only the item displayed will be reset to the factory pre- setting.

Refer to page 20 for details on the TV-SYSTEM setting which is displayed in the PICTURE screen, and to the following page for details on the W-BAL R/G/B setting which is displayed when RGB signals are being input. Furthermore, refer to page 19 for details on the SIGNAL MODE setting when RGB signals are being input.

If a PAL or SECAM signal is being input, the TINT item will not appear on the screen.

-22-

Page 22 Page 24
Image 23
Page 22 Page 24
Contents LCD Projector Dear Panasonic Customer ContentsFeatures Important Safety Notice When using the projector Precautions with regard to safetySetting-up Do not place any heavy objects on top of the projector If problems occur during useCleaning and maintenance Take particular care when replacing the lamp unitAbout condensation Precautions on handlingWipe the cabinet with a soft, dry cloth Side view Remote control unitLocation and function of each part Front viewTop and front ProjectorSide terminal board Back, bottom and right viewDo not do any of the following Before using the remote control unitInserting the batteries If facing the remote control unit toward the screen Operating range of the remote control unitPower button Main Power switch Turning the power on and offTurning on the power Turning off the powerFlexible translucent screen Rigid-type translucent screen Screen characteristics referenceScreen requirements Silver screen Beaded screenProjection distance L Height from lower edge Minimum Standard setting-up positionsStandard setting-up dimensions Adjusting the position of the projected picture Adjuster button Adjustable legs Setting the projector up horizontallyRetracting the adjustable legs Adjustment procedureAdjustment procedure for direct adjustment Adjusting the lensRear mounting Setting-up positions and changing the projection methodSetting procedure Front mountingChanging the input source Basic operationNo. of dots Switching the signal mode during RGB signal inputAdjusting the volume System format selection for S-VIDEO Video input signalsDisplaying the on-screen menu Remote control unitTurning off the sound Adjusting the picture to the desired setting BAL R BAL G BAL B Adjusting the white balanceAdjustment procedure for volume adjustment Adjusting the sound to the desired settingAdjustment procedure for horizontal position adjustment Adjusting the picture positionBottom blanking correction for the V-BLK-B Adjusting the blankingLeft-side blanking correction for the H-BLK-L Top blanking correction for the V-BLK-TAdjustment func Adjusting the horizontal amplitudeWhen increasing the horizontal amplitude When decreasing the horizontal amplitudeAdjusting the clock phase About dot clock adjustmentAdjusting the dot clock frequency Disabling the Power button of the remote control unit Using other useful functionsChanging the on-screen display language to another language Using the countdown timerUsing the lens retracting function Using the power save functionSetting procedure VCR System configuration exampleExample of connection to audio-visual equipment Computer for Example of connection to a computerComputer Audio system Pointer Click 1 button Wireless mouseExample of connection OperationBasic format Using the serial connectorPin layout and signal names for Serial connector Communication settingsAVL Control commandsCable specifications POFPossible cause IndicatorsCleaning the air filter Install the air filter cover Clean the air filter and the air filter clampsReplacing the lamp unit Lamp unit replacement periodFixing screw for the lamp unit Replacement procedureLamp unit cover Fixing screw for the lamp unit cover Page Problem Before asking for service, check the following pointsRGB HD/SYNC Audio Video Audio in L-R SpecificationsFCC Trademark AcknowledgementsDimensions
Top Page Image Contents