Nortel Networks P0605618, 555-7101-217 Switch connectivity, CallPilot Elan and Clan network setup

One network card provides connectivity to the ELAN.

1001rp server description Standard 1.0

In this illustration, the telephony LAN (TLAN) provides IP connectivity between the Succession CSE 1000 system and the i2004 Internet phonesets. The connection between the Call Server and Media Gateway can be point- to-point, or it can be through the LAN, if the system is installed in a distributed data network.

For information about the Succession CSE 1000 system and i2004 Internet phoneset bandwidth and network requirements, refer to the Succession Communication Server for Enterprise 1000 Planning and Installation Guide (NTP 553-3023-210).

Switch connectivity

For more details about how the 1001rp server and switch connection is established, refer to Part 3 of the CallPilot Installation and Configuration binder.

CallPilot ELAN and CLAN network setup

The 1001rp server provides 10- or 100Base-T Ethernet connectivity through network interface cards (NIC) installed in the server. See “Slot assignments” on page 14 for details on the location of network cards. The function of each Ñnetwork card is described below:

For information about the ELAN’s purpose and requirements, see “About the ELAN” in Part 1 of the CallPilot Installation and

ÑConfiguration binder.

A second network card is optional.

This optional NIC is required only for Meridian 1 or Succession

CSE 1000 systems that require a CLAN connection (in addition to the ELAN connection). The CLAN provides data connectivity between desktop and web messaging clients, web-enabled administrative PCs, and the CallPilot server.

22 CallPilot