Power supply installation | Standard 1.0 |
Installing the second power supply module (AC or DC)
Introduction
One power supply module is shipped installed. The second power supply module is shipped uninstalled and must be installed as part of the CallPilot installation.
AC versus DC systems
The power supply modules are similar in appearance for both AC and DC 1001rp servers. The procedures in this section apply to both AC and DC 1001rp servers.
About the power supply module
After the server is powered up (later in this guide), the power supply module LED indicates its status.
A green LED indicates that the power supply module is working properly. If the LED on the power supply module is unlit or red, the module is failing or has failed. Other indicators are an alarm sounding and the power supply LED on the status display on the front of the server turning red.
40 | CallPilot |