The Speaker Company ta200 manual Media Specifications Dpi models

1.6 Media Specifications

Media Specifications	203 dpi models	300 dpi models
Label roll capacity	127 mm (5”) OD
Media type	Continuous, die-cut, black mark, fan-fold, notch
Media wound type	Printing face outside wound & Printing face inside wound
Media width (label +	Max. 118 mm (4.6”)
liner)
	Min. 25.4 mm (1.0”)
Media thickness (label	Max. 0.254 mm (10 mil)
+ liner)
	Min. 0.06 mm (2.36 mil)
Media core diameter	25.4 mm~38 mm (1”~1.5”)
Label length	10~2,794 mm (0.39”~110”)	10~1,016 mm (0.39”~40”)
	Note:
	If your label length is less than 25.4mm (1”), we
	recommend you to use the perforation at the gap for
	easier tear away.
Label length (peeler	Max. 152.4 mm (6”)
mode)
	Min. 25.4 mm (1”)
Label length (cutter	Max. 2,794 mm (110”)	Max. 1,016 mm (40”)
mode)
	Min. 25.4 mm (1”)	Min. 25.4 mm (1”)
Gap height	Min. 2 mm (0.09”)
Black mark height	Min. 2 mm (0.09”)
Black mark width	Min. 8 mm (0.31”)

5