The Speaker Company ta200 manual Loading the Media in Cutter Mode Option

Page 25

3.3.3Loading the Media in Cutter Mode (Option)

1.Refer to chapter 3.3.1 to install the label.

2. Lead the media through the cutter paper opening.

3. Close the print head mechanism and printer cover. Use the DiagTool to set the printer for cutter mode by selecting “CUTTER” option for Post-Print Action setting then click “Set” button to enable the cutter mode. Press the FEED button to test.

Note:

Please calibrate the gap/black mark sensor when changing media.

13

Image 25

Contents TA200/ TA300 Series Copyright Information IEC Agency Compliance and ApprovalsContents Common Problems Start the Diagnostic Tool Printer FunctionAuto Calibration Product Introduction IntroductionPrinter Standard Features Product FeaturesProduct standard feature 203 dpi 300 dpi Models Product option feature User Dealer Factory Options Printer Optional FeaturesPrint Specifications General SpecificationsRibbon Specifications Print Specifications Dpi modelsMedia Specifications Dpi models Media SpecificationsUnpacking and Inspection Operations OverviewFront View Printer OverviewInterior View Rear View Setting up the Printer SetupLoading the Ribbon Page Page  Ribbon loading path Loading the Roll Labels Loading the MediaGap sensor Media guide  Media loading path Loading the Media in Peel-off mode Option Label Liner Loading the Media in Cutter Mode Option Roll mount Plate External Label Roll Mount Installation OptionPage LED and Button Functions LED IndicatorRegular Button Functions Ribbon and Gap/Black Mark Sensor Calibration Power-on Utilities2 Gap/Black Mark Calibration, Self-test and Dump Mode  Self-test Gap/black mark sensor intension Printer Initialization  Dump modeSet Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default settingSkip AUTO.BAS Start the Diagnostic Tool Diagnostic ToolFunction Description Printer FunctionAuto Calibration Calibrating Media Sensor by Diagnostic ToolUsing USB interface to setup Ethernet interface Setting Ethernet by Diagnostic Utility OptionUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Common Problems TroubleshootingFlash / Dram Printing position of small Printer Part Method Interval MaintenancePrint Head Revise History Date Content EditorPage No.35, Sec , Ligong 1st Rd., Wujie Township