The Speaker Company ta200 manual Start the Diagnostic Tool

Page 36

5. Diagnostic Tool

TSC’s Diagnostic Utility is an integrated tool incorporating features that enable you to explore a printer’s settings/status; change a printer’s settings; download graphics, fonts and firmware; create a printer bitmap font; and send additional commands to a printer. With the aid of this powerful tool, you can review printer status and settings in an instant, which makes it much easier to troubleshoot problems and other issues.

5.1Start the Diagnostic Tool

1.Double click on the Diagnostic tool icon to start the software.

2.There are four features (Printer Configuration, File Manager, Bitmap Font Manager, Command Tool) included in the Diagnostic utility.

Features tab Interface

Printer functions

Printer setup

Printer Status

24

Image 36

Contents TA200/ TA300 Series Copyright Information Agency Compliance and Approvals IECContents Start the Diagnostic Tool Printer Function Common ProblemsAuto Calibration Introduction Product IntroductionProduct Features Printer Standard FeaturesProduct standard feature 203 dpi 300 dpi Models Printer Optional Features Product option feature User Dealer Factory OptionsGeneral Specifications Print SpecificationsRibbon Specifications Print Specifications Dpi modelsMedia Specifications Media Specifications Dpi modelsOperations Overview Unpacking and InspectionPrinter Overview Front ViewInterior View Rear View Setup Setting up the PrinterLoading the Ribbon Page Page  Ribbon loading path Loading the Media Loading the Roll LabelsGap sensor Media guide  Media loading path Loading the Media in Peel-off mode Option Label Liner Loading the Media in Cutter Mode Option External Label Roll Mount Installation Option Roll mount PlatePage LED Indicator LED and Button FunctionsRegular Button Functions Power-on Utilities Ribbon and Gap/Black Mark Sensor Calibration2 Gap/Black Mark Calibration, Self-test and Dump Mode  Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap SensorSkip AUTO.BAS Diagnostic Tool Start the Diagnostic ToolPrinter Function Function DescriptionCalibrating Media Sensor by Diagnostic Tool Auto CalibrationSetting Ethernet by Diagnostic Utility Option Using USB interface to setup Ethernet interfaceUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Troubleshooting Common ProblemsFlash / Dram Printing position of small Maintenance Printer Part Method IntervalPrint Head Date Content Editor Revise HistoryPage No.35, Sec , Ligong 1st Rd., Wujie Township