The Speaker Company ta200 manual Setting Ethernet by Diagnostic Utility Option

Page 39

5.4 Setting Ethernet by Diagnostic Utility (Option)

The Diagnostic Utility is enclosed in the CD disk \Utilities directory. Users can use Diagnostic Tool to setup the Ethernet by RS-232, USB and Ethernet interfaces. The following contents will instruct users how to configure the Ethernet by these three interfaces.

5.4.1Using USB interface to setup Ethernet interface

1.Connect the USB cable between the computer and the printer.

2.Turn on the printer power.

3. Start the Diagnostic Utility by double clicking on the

icon.

4.The Diagnostic Utility default interface setting is USB interface. If USB interface is connected with printer, no other settings need to be changed in the interface field.

5.Click on the “Ethernet Setup” button from “Printer Function” group in Printer Configuration tab to setup the IP address, subnet mask and gateway for the on board Ethernet.

27

Image 39

Contents TA200/ TA300 Series Copyright Information IEC Agency Compliance and ApprovalsContents Start the Diagnostic Tool Printer Function Common ProblemsAuto Calibration Product Introduction IntroductionProduct Features Printer Standard FeaturesProduct standard feature 203 dpi 300 dpi Models Product option feature User Dealer Factory Options Printer Optional FeaturesPrint Specifications Dpi models General SpecificationsPrint Specifications Ribbon SpecificationsMedia Specifications Dpi models Media SpecificationsUnpacking and Inspection Operations OverviewFront View Printer OverviewInterior View Rear View Setting up the Printer SetupLoading the Ribbon Page Page  Ribbon loading path Loading the Roll Labels Loading the MediaGap sensor Media guide  Media loading path Loading the Media in Peel-off mode Option Label Liner Loading the Media in Cutter Mode Option Roll mount Plate External Label Roll Mount Installation OptionPage LED Indicator LED and Button FunctionsRegular Button Functions Ribbon and Gap/Black Mark Sensor Calibration Power-on Utilities2 Gap/Black Mark Calibration, Self-test and Dump Mode  Self-test Gap/black mark sensor intension Printer Initialization  Dump modeSet Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default settingSkip AUTO.BAS Start the Diagnostic Tool Diagnostic ToolFunction Description Printer FunctionAuto Calibration Calibrating Media Sensor by Diagnostic ToolUsing USB interface to setup Ethernet interface Setting Ethernet by Diagnostic Utility OptionUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Common Problems TroubleshootingFlash / Dram Printing position of small Maintenance Printer Part Method IntervalPrint Head Revise History Date Content EditorPage No.35, Sec , Ligong 1st Rd., Wujie Township