The Speaker Company ta200 manual Using Ethernet interface to setup Ethernet interface

Page 41

5.4.3Using Ethernet interface to setup Ethernet interface

1.Connect the computer and the printer to the LAN.

2.Turn on the printer power.

3. Start the Diagnostic Utility by double clicks on the

icon.

4.Select “Ethernet” as the interface then click on the “Setup” button to setup the IP address, subnet mask and gateway for the on board Ethernet.

5.Click the “Discover Device” button to explore the printers that exist on the network.

6.Select the printer in the left side of listed printers, the correspondent IP address will be shown in the right side “IP address/Printer Name” field.

7.Click “Change IP Address” to configure the IP address obtained by DHCP or static.

The default IP address is obtained by DHCP. To change the setting to static IP address, click “Static IP” radio button then enter the IP address, subnet mask and gateway. Click “Set IP” to take effect the settings.

29

Image 41

Contents TA200/ TA300 Series Copyright Information IEC Agency Compliance and ApprovalsContents Auto Calibration Start the Diagnostic Tool Printer FunctionCommon Problems Product Introduction IntroductionProduct standard feature 203 dpi 300 dpi Models Product FeaturesPrinter Standard Features Product option feature User Dealer Factory Options Printer Optional FeaturesPrint Specifications General SpecificationsRibbon Specifications Print Specifications Dpi modelsMedia Specifications Dpi models Media SpecificationsUnpacking and Inspection Operations OverviewFront View Printer OverviewInterior View Rear View Setting up the Printer SetupLoading the Ribbon Page Page  Ribbon loading path Loading the Roll Labels Loading the MediaGap sensor Media guide  Media loading path Loading the Media in Peel-off mode Option Label Liner Loading the Media in Cutter Mode Option Roll mount Plate External Label Roll Mount Installation OptionPage Regular Button Functions LED IndicatorLED and Button Functions Ribbon and Gap/Black Mark Sensor Calibration Power-on Utilities2 Gap/Black Mark Calibration, Self-test and Dump Mode  Self-test Gap/black mark sensor intension Printer Initialization  Dump modeSet Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default settingSkip AUTO.BAS Start the Diagnostic Tool Diagnostic ToolFunction Description Printer FunctionAuto Calibration Calibrating Media Sensor by Diagnostic ToolUsing USB interface to setup Ethernet interface Setting Ethernet by Diagnostic Utility OptionUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Common Problems TroubleshootingFlash / Dram Printing position of small Print Head MaintenancePrinter Part Method Interval Revise History Date Content EditorPage No.35, Sec , Ligong 1st Rd., Wujie Township