The Speaker Company ta200 manual Skip AUTO.BAS

3.Release the button when LED turns red/amber after 5 green/amber blinks. (Any red/amber will do during the 5 blinks).

The LED color will be changed as following:

Amber  red (5 blinks)  amber (5 blinks)  green (5 blinks)  green/amber (5 blinks)  red/amber (5 blinks)  solid green

4.3.6Skip AUTO.BAS

TSPL2 programming language allows user to download an auto execution file to flash memory. Printer will run the AUTO.BAS program immediately when turning on printer power. The AUTO.BAS program can be interrupted without running the program by the power-on utility.

Please follow the procedures below to skip an AUTO.BAS program.

1.Turn off printer power.

2.Press the FEED button and then turn on power.

3.Release the FEED button when LED becomes solid green.

The LED color will be changed as following:

Amber  red (5 blinks)  amber (5 blinks)  green (5 blinks)  green/amber (5 blinks)  red/amber (5 blinks)  solid green

4.Printer will be interrupted to run the AUTO.BAS program.

23