MGE UPS Systems 5000 RT user manual UPS Set-Up, Local Settings, Output Settings, ON/OFF Settings

Pulsar MX

4.4 UPS Set-Up

Local Settings

Function	Factory Setting	Options
Language	English	French, German, Italian, Portuguese, Spanish
Date/Time Format	International format	US (MM-DD-YYYY/HH:MM AM/PM)
	(DD-MM-YYYY/HH :MM)
Date/Time Change	GMT + 1	MM-DD-YYYY/HH :MM adjustable
	(Continental Europe)
Audible Alarm	Yes	No

Output Settings

Function	Factory Setting	Options	Comments
Output Voltage	208V	200V / 230V / 220V /
		240V / 250V
Freq Converter	Disabled	Enabled
Output Frequency	60 Hz	50 Hz	User selectable under frequency-
			converter mode
Eco Mode	Disabled	Enabled	See glossary
Slew rate	1 Hz/sec.	0.5 Hz/sec.
Bypass Transfer	Yes	No	Transfer to bypass if Normal AC
			source is out of tolerance
			Break time calibration during load
Interrupt Time	10 ms	20 ms, ...... , 200 ms	transfer on Normal AC source out
			of tolerance
Overload Prealarm	105 %	40%, 50%, 70%	Alarm if threshold is overrun

ON/OFF Settings

Function	Factory Setting	Options	Comments
Cold Start	Disabled	Enabled	Start on battery
			Enables automatic restart of the
Forced Reboot	Enabled	Enabled	system even if Normal AC source
			is restored before the end of the
			shutdown sequence
Auto Restart	Enabled	Disabled	UPS restarts automatically when
			Normal AC source is restored
Energy Saving	Disabled	Enabled	Automatic shutdown on battery if
			output load level < 10%
Sleep Mode	Enabled	Disabled
			Enables consideration of
Remote Command	Enabled	Disabled	shutdown or restart orders from
			software to be authorized

4 — 2	Access to Maintenance and	86-87050-00 A01
	Personalization Data