MGE UPS Systems 5000 RT Maintenance, UPS Set-Up Using External Software, Battery Settings

Installation and User Manual

Battery Settings

Function	Factory Setting	Options	Comments
Auto Battery Test	Every week	No test / daily / monthly
Low Batt warning	20%	0 to 100%	1% increment
	UPS reads number of
User Battery Settings	battery modules	From 0 to 40 Ah	5 Ah increment
	connected
Deep Discharge			Protection against deep
	Yes	No	discharge. If disable, MGE UPS
Protect
			SYSTEMS warranty will be void

4.5 Maintenance

Function	Sub-Function	Option/Display	Comments
		SN: xxxxxxxxx	Serial number
Model	Power Module	SOFT: xxx	Soft version
		NT: xxx	Technical level
		Description	10 alarms can be stored
	Read	Date Hour
Alarm History			automatically
		Alarm xxx
	Erase	No / Yes
Manual Batt Test	Manual Battery Test	No / Yes
Led & Buzzer Test	Led & Buzzer Test	No / Yes
Life Cycle Monitoring	LCM	Enable / Disable	Life cycling monitoring alarms
	Auto Statistics	Statistics	You need to register at
Statistics			www.mgeups.com/Icm to get the
		Reset Date: No, Yes
	Custom Statistics		code and get access to free
		Statistics	statistics
Operation Limits	Operation Limits		Automatic alarms displayed when
			UPS is operating near the limits

4.6 UPS Set-Up Using External Software

◗Insert the Solution-Pac CD-ROM in the drive.

◗ On the first navigation screen, select "Point to Point solution" and follow the instructions on how to install the Personal Solution-Pac software.

◗Then select "Settings", "Advanced settings" and "UPS settings".

Note: This feature is only supported through Windows and the RS232 communication.

86-87050-00 A01	Access to Maintenance and	4 — 3
	Personalization Data