MGE UPS Systems user manual EPS 7000 Single Module Operation

EPS 7000 Single Module

Section 2 Operation
section	description	. . .page
2.0	Scope	. . . .2-1
2.1	Status Screen Display	. . . .2-1
2.2	Settings Selection Screen	. . . .2-2
2.3	Alarms	. . . .2-2
2.4	Sensor Measurements	. . . .2-3
2.5	Voltage Measurements	. . . .2-4
2.6	Current Measurements	. . . .2-5
2.7	Power Frequency Measurements	. . . .2-6
2.8	Battery Measurements	. . . .2-7
2.9	LCD Messages	. . . .2-8
2.9.1	General Alarms	. . . .2-8
2.9.2	Secondary Alarms	. . . .2-8
2.10	Preparations Before Start-up	. . .2-12
2.10.1	Checks Before Start-up	. . .2-12
2.10.2	Start-up	. . .2-12
2.10.3	Checks After Start-up	. . .2-13
2.11	Shutdown	. . .2-13
2.11.1	Emergency Shutdown Using EPO	. . .2-14
2.11.2	Normal Shutdown	. . .2-14
2.11.3	With Maintenance Bypass	. . .2-14
2.11.4	Without Maintenance Bypass	. . .2-15
2.12	Forced Transfers	. . .2-16
2.12.1	Uninterrupted Transfer Conditions	. . .2-16
2.12.2	Forced Transfer from Bypass AC Input Source to Inverter	. . .2-16
2.12.3	Forced Transfer from Inverter to Bypass AC Input	. . .2-16

Section 3	Maintenance
	section	description	page
	3.0	Scope	.3-1
	3.1	Safety Instructions	.3-1
	3.2	Important Safety Instructions for Servicing Batteries	.3-1
	3.3	Preventive Maintenance	.3-2
	3.4	Replacement Parts	.3-2
Glossary	g-1

page c ii Contents