MGE UPS Systems 3000 VA, 2000 user manual Introduction

Page 2

Introduction

Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.

The Pulsar EXtreme range has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of the many features of your UPS.

MGE UPS SYSTEMS pays great attention to the environmental impact of its products. Measures that have made Pulsar EXtreme a reference in environmental protection include:

◗Production in an ISO 14001 certified factory,

◗Recycling of Pulsar EXtreme at the end of its service life.

To discover the entire range of MGE UPS SYSTEMS products and the options available for the Pulsar EXtreme range:

◗We invite you to visit our Web site at www.mgeups.com

(page: www.mgeups.com/products/pdt230/smallups/extreme/extrem10.htm), ◗Or contact your MGE UPS SYSTEMS representative.

Page 2 - 51033211EN/AC

Image 2

Contents Pulsar EXtreme Introduction Pictograms Using this documentForeword Contents Failure of AC input power and operation on battery power Glossary IndexTower model PresentationPulsar EXtreme range Rack modelConnection modules Fault tolerantHot swap Install Output terminal block with cable clampBack Battery extensions for UPS backup times of 66 minutes OptionsCLA Alarms Battery Load Remaining Control panelUnpacking and checks InstallationCD ROM with Solution Pac and UPS Driver softwares Rack model Installation of the rack version Rack mounting diagram with railsInstallation of the communications-card option Connection to the RS 232 communications port optionalSecuring the connection modules Securing and connecting the connection modulesConnection to the AC-power source Two screwsConnection of equipment to a terminal block Always connect the earthing wire firstHot swap Power and equipment connections ON-LINE operating mode OperationStart-up Bargraph indicationsFailure of AC input power and operation on battery power Function Personalizable function Default settingPersonalization On / OFF conditions tabOutput tab Battery tabPersonalizable function Default setting Options By-pass tabConnected equipment is no longer supplied with power ShutdownMaintenance Troubleshooting26 51033211EN/AC Connected equipment is again protected by the UPS UPS replacementFault-tolerant connection module Hot-swap and Install connection modules Press button 24 and wait 20 seconds Check that LED 21 is on This product has been designed to respect the environment UPS recycling at the end of service lifeEnvironment PackingAppendices GlossarySleep mode InstallON-LINE mode Start on battery powerBattery Index34 51033211EN/AC