American Power Conversion MatrixTM UPS Module Interconnections, Vac Input Configuration

Page 11

4.5.2.Using a medium size phillips screwdriver, remove all 10 screws that secure the power distribution plate to the rear of the Isolation Unit. Move aside the power distribution plate. Take care not to strain the wires connected to the devices on the plate.

208 Vac Input Configuration

4.5.3.Remove the phillips head 10-32 x 3/8" SEM screw holding the red Input Voltage Select Wire (see illustration) to the tap bar marked "208 VAC SELECT."

4.5.4.Move the red Input Voltage Select Wire to the tap bar marked "240 VAC SELECT" and tighten the screw.

4.5.5.Check your work before reattaching the power distribution plate. Take care not to crimp or pinch

any of the wires connected to the devices on the power distribution plate.

240 Vac Input Configuration

4.6 Module Interconnections

Follow the instructions listed below to install and lock the battery couplers.

4.6.1.Using a phillips screwdriver, remove the battery coupler clamps from the Electronics Unit and from all but one Battery Pack.

4.6.2.Turn the battery coupler clamp and refasten loosely at one side.

4.6.3.Mate the battery couplers in the fashion shown below. The Battery Packs are electrically connected in parallel.

4.6.4. Fasten remaining side of battery coupler clamp to lock couplers in place.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MatrixTM UPS User’s Manual American Power ConversionTable of Contents Hot Swappable Modules Emergency Power Off EPOIntroduction OverviewRemote Interfaces SafetyDisplay Isolation Unit IU Presentation5a. Nema 5-15R receptacles Rear View of the Electronics Unit Electronics Unit EURear View Battery PackProtection Strategies InstallationReceiving Inspection Input Voltage Selection PlacementMoving the UPS Module Interconnections Vac Input ConfigurationTypical installation showing mated battery couplers Emergency Power Off EPO Interface Start-Up Modes of Operation OperationInput Plug Incompatibility On-battery mode Sleep ModeStandby mode On-line modeTransfer between modes of operation Bypass modeDefault screens Display and Controls OperationUPS Status menu UPS Control menuUPS Diagnostics menu Page UPS Setup Page Page UPS Tests Password protectionInterface Kits PowerChute SoftwareUPS Monitoring Computer Interface Port Difficulty Troubleshooting Chart Replace Electronics Unit EU Fault MessagesUPS requires service Battery status Replacing the Electronics Unit Replacing or Adding Battery Packs Obtaining Service Storing the UPS SpecificationsApprovals Noise and Surge IsolationEnvironment Physical10.69 13.13 15.57 18.01 Typical On-Battery Run Times11.56

MatrixTM UPS specifications

American Power Conversion (APC), a leader in power management solutions, has developed the MatrixTM Uninterruptible Power Supply (UPS) system to meet the critical power needs of data center infrastructure. The MatrixTM UPS is designed for scalability, reliability, and efficiency, making it an ideal choice for organizations requiring robust backup power systems.

One of the main features of the MatrixTM UPS is its modular design, which allows for easy configuration and scalability. Organizations can start with a basic setup and expand capacity as needed, ensuring optimal utilization of resources. The system is available in various configurations, enabling customization according to specific power and environmental requirements. This modularity also facilitates easy maintenance and upgrades without significant downtime.

The MatrixTM UPS utilizes advanced technologies, such as dual conversion and intelligent battery management. The dual conversion technology ensures that power is provided in a clean and consistent manner, free from fluctuations and disturbances. Additionally, the system features an integrated battery management system that optimizes battery performance, extends lifespan, and enhances overall efficiency.

One of the standout characteristics of the MatrixTM UPS is its energy efficiency. With a high-efficiency rating, this UPS minimizes energy consumption during operation, which significantly reduces operational costs and contributes to a lower carbon footprint. This is particularly beneficial for businesses looking to adhere to sustainability goals while maintaining reliable power supply.

Another key feature is the intuitive user interface that simplifies monitoring and control. Users can easily access real-time information on power status, battery health, and operational efficiency through a graphical LCD. Remote management capabilities enable administrators to monitor the system from any location, providing added flexibility and ensuring quick response times in case of power issues.

The MatrixTM UPS also prioritizes redundancy, with features such as N+1 architecture, ensuring that backup power is reliable even in the event of component failure. This level of redundancy is crucial for mission-critical applications where power interruptions can lead to significant operational disruptions.

In summary, the American Power Conversion MatrixTM UPS stands out with its modular design, advanced technology, high energy efficiency, and user-friendly interface. These characteristics make it a reliable solution for businesses looking to ensure continuity of operations in an increasingly power-dependent environment. With its robust capabilities, the MatrixTM UPS positions itself as a cornerstone for effective power management in data centers and beyond.
Top Page Image Contents