American Power Conversion MatrixTM UPS user manual UPS Tests, Password protection

Page 24

5.2.7 UPS Tests

The UPS Tests menu allows the user to access sub-menus that show operation confirmation functions.

This screen shows the audible alarm test sub-menu. When the Do key is pressed, the UPS will briefly sound the audible alarm.

This screen shows the battery test sub-menu. When the Do key is pressed, the UPS will perform a self test to determine the readiness of the UPS and the batteries to operate the load while on-battery. When conducting this test, the UPS operates on-battery. The UPS does not signal the on-battery condition at the computer interface port during this test. The display will report PASS or FAIL at the end of the test.

This screen shows the battery run time calibration test sub-menu. To calibrate the UPS’s run time display following installation, press the Do key. If the calibration test is not conducted, the UPS provides only a rough estimate of run time until actual battery statistics can be acquired during an extended utility failure.

When the Do key is pressed, the UPS will perform the test only if battery capacity is at 100%. The test is completed and the UPS returns to normal on-line operation when the batteries are discharged to approximately 25% of their full capacity. The calibration test can be aborted at any time during the test.

5.2.8 Password protection

All functions accessed by the UPS Control, UPS Setup and UPS Tests menus may be password protected to prevent operation of the unit in a fashion not intended by the UPS manager. The password settings are accessed by optional UPS monitoring application software.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents American Power Conversion MatrixTM UPS User’s ManualTable of Contents Emergency Power Off EPO IntroductionOverview Hot Swappable ModulesSafety DisplayRemote Interfaces Presentation Isolation Unit IU5a. Nema 5-15R receptacles Electronics Unit EU Rear View of the Electronics UnitBattery Pack Rear ViewInstallation Receiving InspectionProtection Strategies Placement Moving the UPSInput Voltage Selection Vac Input Configuration Module InterconnectionsTypical installation showing mated battery couplers Emergency Power Off EPO Interface Start-Up Operation Input Plug IncompatibilityModes of Operation Sleep Mode Standby modeOn-line mode On-battery modeBypass mode Default screensDisplay and Controls Operation Transfer between modes of operationUPS Control menu UPS Status menuUPS Diagnostics menu Page UPS Setup Page Page Password protection UPS TestsPowerChute Software UPS MonitoringInterface Kits Computer Interface Port Difficulty Troubleshooting Chart Fault Messages UPS requires serviceReplace Electronics Unit EU Battery status Replacing the Electronics Unit Replacing or Adding Battery Packs Obtaining Service Specifications Storing the UPSNoise and Surge Isolation EnvironmentPhysical ApprovalsTypical On-Battery Run Times 10.69 13.13 15.57 18.0111.56

MatrixTM UPS specifications

American Power Conversion (APC), a leader in power management solutions, has developed the MatrixTM Uninterruptible Power Supply (UPS) system to meet the critical power needs of data center infrastructure. The MatrixTM UPS is designed for scalability, reliability, and efficiency, making it an ideal choice for organizations requiring robust backup power systems.

One of the main features of the MatrixTM UPS is its modular design, which allows for easy configuration and scalability. Organizations can start with a basic setup and expand capacity as needed, ensuring optimal utilization of resources. The system is available in various configurations, enabling customization according to specific power and environmental requirements. This modularity also facilitates easy maintenance and upgrades without significant downtime.

The MatrixTM UPS utilizes advanced technologies, such as dual conversion and intelligent battery management. The dual conversion technology ensures that power is provided in a clean and consistent manner, free from fluctuations and disturbances. Additionally, the system features an integrated battery management system that optimizes battery performance, extends lifespan, and enhances overall efficiency.

One of the standout characteristics of the MatrixTM UPS is its energy efficiency. With a high-efficiency rating, this UPS minimizes energy consumption during operation, which significantly reduces operational costs and contributes to a lower carbon footprint. This is particularly beneficial for businesses looking to adhere to sustainability goals while maintaining reliable power supply.

Another key feature is the intuitive user interface that simplifies monitoring and control. Users can easily access real-time information on power status, battery health, and operational efficiency through a graphical LCD. Remote management capabilities enable administrators to monitor the system from any location, providing added flexibility and ensuring quick response times in case of power issues.

The MatrixTM UPS also prioritizes redundancy, with features such as N+1 architecture, ensuring that backup power is reliable even in the event of component failure. This level of redundancy is crucial for mission-critical applications where power interruptions can lead to significant operational disruptions.

In summary, the American Power Conversion MatrixTM UPS stands out with its modular design, advanced technology, high energy efficiency, and user-friendly interface. These characteristics make it a reliable solution for businesses looking to ensure continuity of operations in an increasingly power-dependent environment. With its robust capabilities, the MatrixTM UPS positions itself as a cornerstone for effective power management in data centers and beyond.
Top Page Image Contents