American Power Conversion MatrixTM UPS user manual Battery status

Page 30

7.2.3 Battery status

The UPS’s battery status displays alert you to problems with the batteries connected to the UPS

This screen indicates that there may be problems with the connections between Battery Packs or between the UPS and the Battery Packs.

This screen indicates that the UPS’s batteries are too low to support

the load connected to the UPS. The UPS cannot restart until the batteries have recharged.

This screen indicates that one or more battery packs connected to the UPS need to be replaced. Check the Replace Battery indicators on the front of the Battery Packs to see which ones need to be replaced.

This screen indicates that the UPS cannot establish communications with any Battery Packs. Verify that the battery communications cables are secure.

This screen indicates that the UPS detected a change in the number of Battery Packs connected to the UPS. Check that the number of battery packs connected to the UPS matches the number shown on the display. If the numbers do not match, check the battery communications cable connections.

Press a key to clear the message.

This screen indicates that the battery is low and requires recharging after an extended mains failure (on-battery). The load has been shut off.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents American Power Conversion MatrixTM UPS User’s ManualTable of Contents Overview Emergency Power Off EPOIntroduction Hot Swappable ModulesSafety DisplayRemote Interfaces Presentation Isolation Unit IU5a. Nema 5-15R receptacles Electronics Unit EU Rear View of the Electronics UnitBattery Pack Rear ViewInstallation Receiving InspectionProtection Strategies Placement Moving the UPSInput Voltage Selection Vac Input Configuration Module InterconnectionsTypical installation showing mated battery couplers Emergency Power Off EPO Interface Start-Up Operation Input Plug IncompatibilityModes of Operation On-line mode Sleep ModeStandby mode On-battery modeDisplay and Controls Operation Bypass modeDefault screens Transfer between modes of operationUPS Control menu UPS Status menuUPS Diagnostics menu Page UPS Setup Page Page Password protection UPS TestsPowerChute Software UPS MonitoringInterface Kits Computer Interface Port Difficulty Troubleshooting Chart Fault Messages UPS requires serviceReplace Electronics Unit EU Battery status Replacing the Electronics Unit Replacing or Adding Battery Packs Obtaining Service Specifications Storing the UPSPhysical Noise and Surge IsolationEnvironment ApprovalsTypical On-Battery Run Times 10.69 13.13 15.57 18.0111.56

MatrixTM UPS specifications

American Power Conversion (APC), a leader in power management solutions, has developed the MatrixTM Uninterruptible Power Supply (UPS) system to meet the critical power needs of data center infrastructure. The MatrixTM UPS is designed for scalability, reliability, and efficiency, making it an ideal choice for organizations requiring robust backup power systems.

One of the main features of the MatrixTM UPS is its modular design, which allows for easy configuration and scalability. Organizations can start with a basic setup and expand capacity as needed, ensuring optimal utilization of resources. The system is available in various configurations, enabling customization according to specific power and environmental requirements. This modularity also facilitates easy maintenance and upgrades without significant downtime.

The MatrixTM UPS utilizes advanced technologies, such as dual conversion and intelligent battery management. The dual conversion technology ensures that power is provided in a clean and consistent manner, free from fluctuations and disturbances. Additionally, the system features an integrated battery management system that optimizes battery performance, extends lifespan, and enhances overall efficiency.

One of the standout characteristics of the MatrixTM UPS is its energy efficiency. With a high-efficiency rating, this UPS minimizes energy consumption during operation, which significantly reduces operational costs and contributes to a lower carbon footprint. This is particularly beneficial for businesses looking to adhere to sustainability goals while maintaining reliable power supply.

Another key feature is the intuitive user interface that simplifies monitoring and control. Users can easily access real-time information on power status, battery health, and operational efficiency through a graphical LCD. Remote management capabilities enable administrators to monitor the system from any location, providing added flexibility and ensuring quick response times in case of power issues.

The MatrixTM UPS also prioritizes redundancy, with features such as N+1 architecture, ensuring that backup power is reliable even in the event of component failure. This level of redundancy is crucial for mission-critical applications where power interruptions can lead to significant operational disruptions.

In summary, the American Power Conversion MatrixTM UPS stands out with its modular design, advanced technology, high energy efficiency, and user-friendly interface. These characteristics make it a reliable solution for businesses looking to ensure continuity of operations in an increasingly power-dependent environment. With its robust capabilities, the MatrixTM UPS positions itself as a cornerstone for effective power management in data centers and beyond.
Top Page Image Contents