
11.Choose one of the following:
•If you want to enable user logins, go to the section, Adding a User Login, on page 21.
•If you do not want to enable user logins, your system is ready to use.
New Configuration File
Note: You must save a new configuration file to your PC before EASY CPU allows you to write to the MegaPower CPU.
To create a new configuration file, do the following:
1.Click File on the main screen.
2.Click New in the dropdown menu bar.
3.Using the configuring information throughout this guide, set up your system configuration.
4.When you have completed your configuration, click File on the main screen.
5.Click Save or Save As… in the dropdown menu bar.
6.Navigate through the Save or Save As… dialog box to a desired folder, and enter an appropriate file name for your configuration.
7.Click Save to save the file. The file is saved to your PC.
8.Click File on the main screen.
9.Click Write in the dropdown menu bar. The Write to MPCPU and/or Save Configuration To File dialog box appears (Figure 46).
Figure 46. Write to MPCPU and/or Save Configuration To File dialog
10.In the section labeled MPCPU A and/or B must be specified in Sys => Options, choose one or both of the following checkboxes depending on whether you have a single MPCPU configuration or both MPCPUs in a dual hotswitch configuration:
•MPCPU A: When checked, the configuration is written to the indicated IP address, which is
defined in the System – Options dialog box. This IP address is
•MPCPU B: When checked, the configuration is written to the indicated IP address, which is defined in the System – Options dialog box.
This IP address is
Note: If both MPCPU IP addresses are the same, a message box will appear stating that the configuration will only be written once to the IP address.
Figure 47. MPCPU Addresses are the same message box
11.In the Site No./Name specified in Sys => Options section, the Site No. and Site Name fields are for reference only and cannot be changed in this dialog box. They are defined in the System – Options dialog box.
12.In the section labeled Config File Save and Backup Options, choose one or both of the following checkboxes:
•Save To File: When checked, the configuration is saved to the path and filename shown in the associated field. You can change the path/filename by clicking the Browse button on the right and navigating to the path/filename of your choice in the dropdown list. When unchecked, the configuration is not saved.
•Backup File: When checked, the configuration is backed up to the path and filename shown in the associated field. You can change the path/filename by clicking the Browse button on the right and navigating to the path/filename of your choice in the dropdown list. When unchecked, the configuration is not saved to the backup file.
13.Click the Write Configuration To Selected MPCPUs and/or Files button to begin writing the configuration data into the CPU, or Cancel to close the dialog box without writing the configuration data.
MEGAPOWER CPU ADMINISTRATOR’S GUIDE
20 of 82