Figure 118. Adding a range of cameras
Removing Monitors or Satellite Sites Access from Keyboards
1.Click on a keyboard (any cell in the keyboard row) in the upper screen.
2.Do one of the following:
•Click on the monitor access row to be removed in the Monitor Access tab in the lower screen.
•Click on the site access row to be removed in the Site Access tab in the lower screen.
3.Click the Remove button on the right side of the lower screen. This removes the specified monitors or satellite sites associated with that keyboard.
Associating Keyboards to Monitors
The Partitions – Keyboards to Monitors screen allows keyboard operators to access selected monitors.
Click on the Partitions – Keyboards to Monitors link in the Explore menu to begin. The following screen appears.
Figure 119. Partitions – keyboards to monitors screen
The Partitions – Keyboards to Monitors screen is split into two sections:
•The upper screen shows existing keyboard definitions and allows you to create new definitions.
•The lower screen allows you to set up monitor access for each keyboard.
You can create, edit, and delete keyboard definitions.
Adding Keyboard Definitions
To add new keyboard definitions:
1.Click Add on the right side of the Partitions – Keyboards to Monitors upper screen. The Add Keyboard dialog box appears.
Figure 120. Add Keyboard dialog
2.To add keyboards, complete the following fields:
•System Port Number – Enter the port number of the keyboard’s connection to the MegaPower CPU. The MegaPower CPU can support up to 128 keyboards using port expansion modules. Port expansion modules convert a single port into four ports. When a port expansion module is connected to a port, port numbering adds an alpha character (a, b, c, d) to each port number; for example, port one becomes ports 1a, 1b, 1c, 1d; port two becomes ports 2a, 2b, 2c, 2d, and so on.
•Expansion Port – Choose the port on the port expansion module (if the MegaPower CPU is so equipped) that the keyboard will connect to. The choices are a, b, c, or d.
•Name – Enter a name for the keyboard using alpha or numeric characters.
3.Click OK to display the new keyboard definition or Cancel to close the dialog box without displaying the definition.
Note: Remember to save or transfer your changes before closing EASY CPU.
MEGAPOWER CPU ADMINISTRATOR’S GUIDE
55 of 82