3-4 Motor Control
The speed of the rollers is continuously adjustable between 0 and 1.5 m/min. (0 and 4.9 ft/min.) Pressing the key runs the rollers in forward direction, pressing the key reverses the direction of the rollers (as long as this button is pressed). The stop key stops the roller movement.
Slow-mode
The machine has a
Once the machine is running in
Changing from
•During slow mode (keep the foot switch pressed), press the (forward) button on the control panel. The machine will run at its
•Next, release the foot switch.
•Finally, release the (forward) button.
Changing from normal mode to
Press the foot switch
NOTE: Releasing the foot switch will stop the machine.
Reversing the machine
To reverse the rotation of the rollers, press the (reverse) button. As long as this button is pressed, the machine will run in reverse direction, at a speed of 0.6 m/min (2”/min) only. Releasing this button will stop the machine.
Care must be taken not to have loose clothing, long hair, jewelry and fingers pinched between the pull rollers at the rear side of the machine.
The rotation of the rollers will stop when:
•The Photoelectric Cells in front of the main rollers are interrupted NOTE: This does NOT happen when the foot switch is used
•An emergency stop button is pressed
•The foot switch is pressed for a short moment
•Excessive unwind tensions are set (the motor will be shut off electronically, press the stop button on the control panel to reset)
•The stop button on the control panel is pressed
15