Oki 12i manual Type 5 Toner

Page 65

 

 

MATERIAL SAFETY DATA SHEET

 

 

Type 5 Toner 52109001

For more information, contact Okidata at:

MSDS # 58330401

 

 

2000 Bishops Gate Boulevard

 

Amorphous Fumed Silica (less than 1% by weight)

 

Mount Laurel, NJ 08054

 

 

CAS# 67762-90-7

Emergency Information: 1-800-OKIDATA

 

 

OSHA PEL 15.0 mg/m3 for total dust

EMERGENCY FIRST AID PROCEDURES

 

ACGIH TLV 10.0 mg/m3 for total dust

 

Note This product is not regulated under Section 313 of SARA, Title III.

Emergency

Procedure

 

Physical Data

Toner

Dilute by giving two glasses of water and induce vomiting by

Melting Point: 110°C (230°F)

swallowed

administering Syrup of Ipecac (follow manufacturer’s instructions).

Boiling Point: Not applicable

(ingested)

Seek medical attention

 

 

 

 

Vapor Pressure: Not applicable

 

NEVER give anything by mouth or attempt to induce vomiting in a

Vapor Density (Air=1): Not applicable

 

person who is unconscious.

 

Evaporation Rate (Butyl Acetate=1): Not applicable

Toner

Remove person to fresh air.

 

 

Specific Gravity (H2O=1): 1.15

inhaled

Seek medical attention.

 

 

Solubility in water: Negligible

 

 

 

Toner gets

Flush eyes with large quantities of cool water for 15 minutes,

Appearance and odor: Black granules, no odor

in the eyes

keeping the eyelids open with fingers. Seek medical attention.

 

Note

Small amounts of toner on skin or clothing can easily be removed

Fire and Explosion Hazard Data

Flash Point (Method Used): Not applicable

 

with soap and cold water. Hot water makes toner harder to remove.

 

Flammable Limits

 

 

 

Hazardous Ingredients

 

Lower Explosive Limit: Not applicable

 

Upper Explosive Limit: Not applicable

 

 

 

Styrene-Butyl Acrylate Copolymer (91% by weight)

 

Extinguishing Media: Water, CO2, Dry Chemical, or Foam

CAS# 25767-47-9

 

 

Special Fire Fighting Procedures: Do not use methods that may

OSHA TWA 15 mg/m3 for total dust

 

create a dust cloud, such as high pressure water and/or steam

ACGIH TLV 10 mg/m3 for total dust

 

Unusual Fire and Explosion Hazards:

 

 

 

Carbon Black (5-7% by weight)

 

Organic components decompose at 200-455°C

CAS# 1333-86-4

 

 

(392-851°F).

OSHA TWA 3.5 mg/m3

 

Material may explosively combust when finely suspended

ACGIH TLV 3.5 mg/m3

 

in air.

Paraffin Wax (less than 3% by weight)

 

Thermal decomposition of organic components may result

CAS# 8002-74-2

 

 

in release of oxides of carbon and nitrogen.

OSHA TWA 2 mg/m3 for total dust

 

 

ACGIH TLV 2 mg/m3 for total dust

 

 

OKIPAGE 12i User’s Guide

55

Image 65
Contents Okipage Bishops Gate Boulevard Mount Laurel, New Jersey Training and Publications DepartmentIii Safety InstructionsPage Page OKI On-Site OKI ExtendTableofContents Viii Service and SupportManual paper feed tray Power switch Paper tray gauge Page Okipage 12i User’s Guide ConsumablesOptions Selecting a Location for Your Printer Checking the ContentsRemoving Operator Panel Protective Film Setting Up Your PrinterRemove the Image Drum Protective Paper Installing Toner Loading Paper Using Legal Size PaperTop Paper Exit Paper Exit OptionsRear Paper Exit Choosing PaperAttaching the Power Cord Connecting the CableInterfacing with your Computer Parallel InterfacePrinting a Font Changing the Display LanguagePrinting a Demo Printer Drivers Printer SoftwareNo CD-ROM Drive? Standard Driver vs. Advanced DriverWindows 95, Windows 98, and Windows NT Installing the DriverStatus Monitor Installing the Standard Driver and the Status Monitor Installing the Status MonitorWindows License Agreement appears. Click YesInstalling the Advanced Driver Using the Status MonitorHighlight Unlisted or Updated Printer. Click Install Okipage 12iPCLXL advanced driver appears. Click OKUsing the Operator Panel Uninstall Printer SoftwareWindows 95, Windows 98, and NT WindowsInstalling the PostScript Driver Macintosh InstallationInterfacing Reactivating the PrinterInstalling Screen Fonts Paper Size Indicator Using the Front Operator PanelReady Light LCD Display WindowButton Functions Operating Your PrinterResetting the Menu Using the Printer MenuOperating Your Printer Sub MenusCategory Items Options Default SettingLevel 1 Menu Monarch DL Envelope Default SettingCOM-10Items Options CategoryFollowing Categories are Dependent on Emulation Operating Your Printer Level 1 MenuLAYOUT1 Fonts & Symbols IBM Condense Level 1 Menu Operating Your Printer Following Categories are Common to ALL Emulations 600 DPI*, 300 DPI Level 2 MenuSEC OFF Prprotek GOOD, BETTER*, Best Operating Your Printer Level 2 MenuClearable Warnings Error Report Parallel I/F RS232C Serial Databits BITS*, 7 Bits Parity NONE*, EVEN, ODD MIN Busy Categor y Options Function Maintenance MenuPrinting a Special Document Using Special Print MediaEnhancing Print Quality Level 1 MenuSelecting Envelopes Printing EnvelopesGuidelines for Transparencies and Labels Using Recycled Print MediaPrinting Transparencies and Adhesive Labels Toner Cartridge Life Replacing The Toner CartridgeCleaning the LED Array Printer MaintenanceReplacing the Image Drum Cartridge Image Drum Cartridge LifeFrom the status monitor Printing a CleaningFrom the front operator panel Tray n Feed JAM or Paper Exit JAM top bin Clearing Paper JamsTray n Input JAM Paper Exit JAM rear tray Problem SolvingMessage CPYnn Printer MessagesSystem Status Cleaning/Maintenance Maintenance Menu ModeMessage ActionManual Paper Feed Request Paper ErrorsController Errors Print Quality ProblemsInterface Errors Message Error nnSolution SymptomProblem Software Problems Software is attempting to print beyond the printer’s Hardware Problems Okidata Customer Support Center Okidata Customer Service RepresentativesYour Dealer Warranty Service Service and SupportFaxable Facts Purchasing SuppliesOkidataServiceCenterLocations Limited Warranty OvernightExchange Index Index Type 5 Toner Health Hazard Data