Canon DS700 manual „ Printing the Nozzle Check Pattern, Print the Nozzle Check Pattern

Page 58

Printing Maintenance

„Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Use this function when printed results are blurred or the color is incorrect.

1 Prepare to print.

(1)Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13.

(2)Load the supplied paper or Canon 4"×6"/ 101.6×152.4mm paper into the paper support. See “Loading Paper” on page 18.

2 Print the Nozzle Check Pattern.

(1)Use the buttons to select Tool Box and then press the button.

(2)Use the button to select Nozzle check

and then press the button.

(3)Use the buttons to select Yes and then

press the button.

The nozzle check pattern is printed.

3 Examining the nozzle check pattern.

When all print check patterns are successfully printed:

Select All A and then press the button.

When no white stripes appear

When there is more than one white stripe on the print check patterns:

Select Also B and then press the button.

When White stripes appear

The confirmation screen of Head Cleaning is displayed.

Select YES to start the head cleaning. See “Print Head Cleaning” on page 57.

56

Image 58
Contents Photo Printing Guide Exif Print Contents Introduction TroubleshootingAppendix Power Cord Easy Setup InstructionsUnpack the Printer Remove the tape from the printer Preparing the PrinterPlace the printer on a flat surface Tape position is subject to changeRemove the protective cap from the print head Installing the Print HeadPress the lock button, then raise the lock lever Place the print head in the holderTake out the ink tank Installing an Ink TankLock the print head into place by lowering the lever Hold the ink tank as shownPrinter Printer Parts and Their FunctionCover Power Button Buttons on the Remote ControlSupplied power cord Move to the left if ink smudges or the printedCopies +- Buttons Settings ButtonPrinter Parts and Their Function Search Button FeetCLASS1 LED Product Menu Screen Page Check the following before connecting the printer to the TV Preparation When Using the Printer with the TV„ Connecting to TV Displaying a Photo on TVTurn on TV and the printer „ Turning off TV and the printerConnect to TV Check the following before turning off TV and the printerSupported memory cards are as follows Using a Memory Card„ Memory Cards Supported by this printer SupportsTurn on For xD-Picture Card, use the compliant adapter „ Inserting a Memory CardInsert only a single type of memory card Turn on„ Removing a Memory Card Card eject button Indicator lampIf you use other cards „ Loading the Print Media Loading Paper„ Print Media to Avoid Turn on the printerLoad the paper Prepare to load paper101.6 × 152.4mm Photo stickers ×6 paper 101.6×152.4 mm Photo Paper Plus Glossy ×6 up to 20 sheets „ Media Types for Card Direct PrintingPhoto Paper Pro 101.6×152.4 mm ×6 up to 20 sheets Paper ×6 up to 20 sheets Credit CardViewing and Printing from the TV Overview Enjoy Photos on TV and Printing -Basic„ Viewing Each Photo on TV and Printing-Photo Gallery Enjoy Photos on TV and Printing -Basic Menu Screen Select Photo GallerySelect the photo to print Use the WX buttons to selectConfirm the Page size and Media type Confirm the settingsStart printing Press the Copies +/CopiesPhoto Print Prepare to printSelect Photo Print Press the OK buttonUse the Copies +/Copies Cancel allSpecify the number of copies to print Previous„ Specifying the Layout Enjoy Photos on TV and Printing -AdvancedSelecting Various Print Option-Print Studio Photo×2 Photo×4 Photo×8Select the paste method Select Layout printSpecify the layout Paste allPaste photos one by one „ Printing Stickers from a Favorite PhotoStickers ×16 Select Sticker print Select Print all „ Printing All PhotosYou can print all photos saved on a memory card „ Printing a Photo List-Print Index Select Print indexSelect Dpof print Press Settings button Handy Functions and Settings„ Specifying the Paper and Other Settings Settings screen is displayedPrints with a border Borderless printPrints on the whole paper without a border Date print Prints the date the photo was takenSpecify the target range „ Searching for Photos with the Shooting Date-SearchPress the Search button Press the buttonSelect Date format „ Setting the Date Display FormatSelect Tool Box from the menu You can change the format of data printingSelect a language for display „ Changing the Language DisplayedYou can change the language displayed on TV „ Resetting All Settings Use the button to select Yes and then press the buttonConnecting to a Digital Camera Printing Photographs Directly from a Digital CameraPage Direct Printing from PictBridge-compatible Digital Cameras „ Confirming or Changing the Camera SettingsAbout the Settings Explained Below Card SizeAbout Layout Paper type Photo„ Media Types for Digital Camera Card #1 Card #2 Card #3Prepare settings Setting the Media Type, Page Size, and Layout„ Displaying and Setting the Infrared print Screen Printing Photos with Infrared Compatible Mobile PhonesSelect Infrared print „ Other Setting ItemsSize Sticker Start Infrared Communication Performing Infrared Printing„ Printing a Photo with a Mobile Phone and the Printer Turn on the printer Load the paper See Loading Paper onDisplay a photo taken with a mobile phone on TV „ Printing a Photo by Displaying it on TVDisplay Photo received via infrared screen is displayed Start Printing Printing with the computer Installing the Printer Driver„ Installing the Printer Driver-Windows Prepare the PrinterInstallation will begin Click Easy InstallRead the License Agreement, then click Yes to continue Next „ Installing the Printer Driver-MacintoshWhen the Installation Results window appears, click OK For U.S. customer onlyDouble-clickSELPHY DS700 xxx.pkg Software installation is completeSoftware installation will start Double-click the Memory Card Utility folderInstallation Double-clickMemory Card Utility 300.mpkg„ How to View the User’s Guide-Macintosh How to View the User’s Guide„ How to View the User’s Guide-Windows „ User’s Guide Table of ContentsPrint Head Deep Cleaning on Printing MaintenancePrint Head Cleaning on Printing the Nozzle Check Pattern on„ Printing the Nozzle Check Pattern When no white stripes appearWhen White stripes appear Print the Nozzle Check PatternStart Print Head Cleaning „ Print Head CleaningConnect TV to the printer and turn them on „ Print Head Deep Cleaning Start Print Head Deep CleaningPrint the Pattern „ Aligning the Print HeadAlign the Print Head Open the cover Replacing an Ink Tank„ Replacing an Ink Tank Ink tank BCI-16 ColorInsert the ink tank Prepare a replacement ink tankRemove the empty ink tank Print head holder moves to the rightReset the ink counter „ Resetting the Ink CounterTo reset the ink counter from Tool Box „ How Low Ink Warning Setting Works Troubleshooting Nothing is Displayed on TV/Image is PoorRemote Control is not Working Message is Displayed on TVSelect Tool Box and then press the OK button Error codeSelect Off and then press the OK button Handling Error Messages Paper Does Not Feed Properly Media type is not Ink tank is not installedCleaning on Print head is misalignedPrinted Surface is Scratched or Ink Blots Select Ink drying wait time Select Long or Longer and then press the OK buttonIts peripheral components PrintingDown PhoneCannot Print Properly from the Digital Camera Service representative as early as possible Install a print head. See Installing the Print Head onDefective. Contact a Canon service representative Printer errorClick Start Over on the Installation Cannot Install the Printer DriverFailure screen Specifications AppendixCamera Direct Print Safety Precautions Cleaning the printerAppendix „ Color Printer Model K10248 DS700 Regulatory InformationFor 220-240V, 50/60Hz model „ Remote Control K30240 RC-10 „ Canadian Radio Interference RegulationsIndex IndexPhoto Print Printing a Photo by Displaying it on TV Xxxxxx Canon INC.2004