Canon DS700 manual „ Replacing an Ink Tank, Open the cover, Ink tank BCI-16 Color

Page 62

Printing Maintenance

(3)Press the button.

The print head position is adjusted.

note

Printing the current setting of the print head position

1Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13.

2Load the supplied paper or Canon 4"×6"/101.6 x 152.4mm Size paper into the paper support.

3Select Tool Box and then press the button.

4Select Head alignment print and then press the button. The pattern print confirmation screen is displayed.

5Select Yes and then press the button. The Head alignment value is printed.

Replacing an Ink Tank

When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used.

•Ink tank: BCI-16 Color

„Replacing an Ink Tank

When an ink tank runs out of ink, replace it using the following steps.

1 Open the cover.

(1) Ensure that the printer is on.

(2) Slide the cover open switch toward the right to open the cover.

The print head holder moves to the center.

60

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Photo Printing Guide Exif Print Contents Appendix TroubleshootingIntroduction Unpack the Printer Easy Setup InstructionsPower Cord Remove the tape from the printer Preparing the PrinterPlace the printer on a flat surface Tape position is subject to changeRemove the protective cap from the print head Installing the Print HeadPress the lock button, then raise the lock lever Place the print head in the holderTake out the ink tank Installing an Ink TankLock the print head into place by lowering the lever Hold the ink tank as shownCover Printer Parts and Their FunctionPrinter Power Button Buttons on the Remote ControlSupplied power cord Move to the left if ink smudges or the printedCopies +- Buttons Settings ButtonPrinter Parts and Their Function Search Button FeetCLASS1 LED Product Menu Screen Page Check the following before connecting the printer to the TV Preparation When Using the Printer with the TV„ Connecting to TV Displaying a Photo on TVTurn on TV and the printer „ Turning off TV and the printerConnect to TV Check the following before turning off TV and the printerSupported memory cards are as follows Using a Memory Card„ Memory Cards Supported by this printer SupportsTurn on For xD-Picture Card, use the compliant adapter „ Inserting a Memory CardInsert only a single type of memory card Turn onIf you use other cards Card eject button Indicator lamp„ Removing a Memory Card „ Loading the Print Media Loading Paper„ Print Media to Avoid Turn on the printer101.6 × 152.4mm Photo stickers ×6 paper Prepare to load paperLoad the paper 101.6×152.4 mm Photo Paper Plus Glossy ×6 up to 20 sheets „ Media Types for Card Direct PrintingPhoto Paper Pro 101.6×152.4 mm ×6 up to 20 sheets Paper ×6 up to 20 sheets Credit Card„ Viewing Each Photo on TV and Printing-Photo Gallery Enjoy Photos on TV and Printing -BasicViewing and Printing from the TV Overview Enjoy Photos on TV and Printing -Basic Menu Screen Select Photo GallerySelect the photo to print Use the WX buttons to selectConfirm the Page size and Media type Confirm the settingsStart printing Press the Copies +/CopiesPhoto Print Prepare to printSelect Photo Print Press the OK buttonUse the Copies +/Copies Cancel allSpecify the number of copies to print Previous„ Specifying the Layout Enjoy Photos on TV and Printing -AdvancedSelecting Various Print Option-Print Studio Photo×2 Photo×4 Photo×8Select the paste method Select Layout printSpecify the layout Paste allStickers ×16 „ Printing Stickers from a Favorite PhotoPaste photos one by one Select Sticker print You can print all photos saved on a memory card „ Printing All PhotosSelect Print all „ Printing a Photo List-Print Index Select Print indexSelect Dpof print Press Settings button Handy Functions and Settings„ Specifying the Paper and Other Settings Settings screen is displayedPrints with a border Borderless printPrints on the whole paper without a border Date print Prints the date the photo was takenSpecify the target range „ Searching for Photos with the Shooting Date-SearchPress the Search button Press the buttonSelect Date format „ Setting the Date Display FormatSelect Tool Box from the menu You can change the format of data printingYou can change the language displayed on TV „ Changing the Language DisplayedSelect a language for display „ Resetting All Settings Use the button to select Yes and then press the buttonConnecting to a Digital Camera Printing Photographs Directly from a Digital CameraPage Direct Printing from PictBridge-compatible Digital Cameras „ Confirming or Changing the Camera SettingsAbout the Settings Explained Below Card SizeAbout Layout Paper type Photo„ Media Types for Digital Camera Card #1 Card #2 Card #3Prepare settings Setting the Media Type, Page Size, and Layout„ Displaying and Setting the Infrared print Screen Printing Photos with Infrared Compatible Mobile PhonesSize Sticker „ Other Setting ItemsSelect Infrared print Start Infrared Communication Performing Infrared Printing„ Printing a Photo with a Mobile Phone and the Printer Turn on the printer Load the paper See Loading Paper onDisplay Photo received via infrared screen is displayed „ Printing a Photo by Displaying it on TVDisplay a photo taken with a mobile phone on TV Start Printing Printing with the computer Installing the Printer Driver„ Installing the Printer Driver-Windows Prepare the PrinterRead the License Agreement, then click Yes to continue Click Easy InstallInstallation will begin Next „ Installing the Printer Driver-MacintoshWhen the Installation Results window appears, click OK For U.S. customer onlyDouble-clickSELPHY DS700 xxx.pkg Software installation is completeSoftware installation will start Double-click the Memory Card Utility folderInstallation Double-clickMemory Card Utility 300.mpkg„ How to View the User’s Guide-Macintosh How to View the User’s Guide„ How to View the User’s Guide-Windows „ User’s Guide Table of ContentsPrint Head Deep Cleaning on Printing MaintenancePrint Head Cleaning on Printing the Nozzle Check Pattern on„ Printing the Nozzle Check Pattern When no white stripes appearWhen White stripes appear Print the Nozzle Check PatternConnect TV to the printer and turn them on „ Print Head CleaningStart Print Head Cleaning „ Print Head Deep Cleaning Start Print Head Deep CleaningAlign the Print Head „ Aligning the Print HeadPrint the Pattern Open the cover Replacing an Ink Tank„ Replacing an Ink Tank Ink tank BCI-16 ColorInsert the ink tank Prepare a replacement ink tankRemove the empty ink tank Print head holder moves to the rightTo reset the ink counter from Tool Box „ Resetting the Ink CounterReset the ink counter „ How Low Ink Warning Setting Works Troubleshooting Nothing is Displayed on TV/Image is PoorRemote Control is not Working Message is Displayed on TVSelect Off and then press the OK button Error codeSelect Tool Box and then press the OK button Handling Error Messages Paper Does Not Feed Properly Media type is not Ink tank is not installedCleaning on Print head is misalignedPrinted Surface is Scratched or Ink Blots Select Ink drying wait time Select Long or Longer and then press the OK buttonIts peripheral components PrintingDown PhoneCannot Print Properly from the Digital Camera Service representative as early as possible Install a print head. See Installing the Print Head onDefective. Contact a Canon service representative Printer errorFailure screen Cannot Install the Printer DriverClick Start Over on the Installation Specifications AppendixCamera Direct Print Safety Precautions Cleaning the printerAppendix For 220-240V, 50/60Hz model Regulatory Information„ Color Printer Model K10248 DS700 „ Remote Control K30240 RC-10 „ Canadian Radio Interference RegulationsIndex IndexPhoto Print Printing a Photo by Displaying it on TV Xxxxxx Canon INC.2004
Top Page Image Contents