Canon DS700 manual „ Print Head Cleaning, Connect TV to the printer and turn them on

Page 59

Printing Maintenance

„Print Head Cleaning

1

2

Clean the Print Head if white stripes appear in the nozzle check pattern. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.

Connect TV to the printer and turn them on.

See “Connect TV to the printer.” on page 13.

Start Print Head Cleaning.

(1)Use the buttons to select Tool Box from the menu screen and then press

the button.

(2)Use the button to select Head Cleaning

and then press the button.

(3)Use the buttons to select Yes and then

press the button.

Important

Do not perform any other operations until the print head cleaning finishes. This takes about 40 seconds.

3 Print the nozzle check pattern to verify that the print head nozzles are clean.

When print head cleaning finishes, the confirmation message is displayed. Select Yes. See “Printing the Nozzle Check Pattern” on page 56.

note

If the problem remains after performing print head cleaning three times, try print head deep cleaning.

57

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Photo Printing Guide Exif Print Contents Appendix TroubleshootingIntroduction Unpack the Printer Easy Setup InstructionsPower Cord Tape position is subject to change Preparing the PrinterPlace the printer on a flat surface Remove the tape from the printerPlace the print head in the holder Installing the Print HeadPress the lock button, then raise the lock lever Remove the protective cap from the print headHold the ink tank as shown Installing an Ink TankLock the print head into place by lowering the lever Take out the ink tankCover Printer Parts and Their FunctionPrinter Move to the left if ink smudges or the printed Buttons on the Remote ControlSupplied power cord Power ButtonFeet Settings ButtonPrinter Parts and Their Function Search Button Copies +- ButtonsCLASS1 LED Product Menu Screen Page Displaying a Photo on TV Preparation When Using the Printer with the TV„ Connecting to TV Check the following before connecting the printer to the TVCheck the following before turning off TV and the printer „ Turning off TV and the printerConnect to TV Turn on TV and the printerSupports Using a Memory Card„ Memory Cards Supported by this printer Supported memory cards are as followsTurn on „ Inserting a Memory CardInsert only a single type of memory card Turn on For xD-Picture Card, use the compliant adapterIf you use other cards Card eject button Indicator lamp„ Removing a Memory Card Turn on the printer Loading Paper„ Print Media to Avoid „ Loading the Print Media101.6 × 152.4mm Photo stickers ×6 paper Prepare to load paperLoad the paper Paper ×6 up to 20 sheets Credit Card „ Media Types for Card Direct PrintingPhoto Paper Pro 101.6×152.4 mm ×6 up to 20 sheets 101.6×152.4 mm Photo Paper Plus Glossy ×6 up to 20 sheets„ Viewing Each Photo on TV and Printing-Photo Gallery Enjoy Photos on TV and Printing -BasicViewing and Printing from the TV Overview Use the WX buttons to select Select Photo GallerySelect the photo to print Enjoy Photos on TV and Printing -Basic Menu ScreenPress the Copies +/Copies Confirm the settingsStart printing Confirm the Page size and Media typePress the OK button Prepare to printSelect Photo Print Photo PrintPrevious Cancel allSpecify the number of copies to print Use the Copies +/CopiesPhoto×2 Photo×4 Photo×8 Enjoy Photos on TV and Printing -AdvancedSelecting Various Print Option-Print Studio „ Specifying the LayoutPaste all Select Layout printSpecify the layout Select the paste methodStickers ×16 „ Printing Stickers from a Favorite PhotoPaste photos one by one Select Sticker print You can print all photos saved on a memory card „ Printing All PhotosSelect Print all Select Print index „ Printing a Photo List-Print IndexSelect Dpof print Settings screen is displayed Handy Functions and Settings„ Specifying the Paper and Other Settings Press Settings buttonDate print Prints the date the photo was taken Borderless printPrints on the whole paper without a border Prints with a borderPress the button „ Searching for Photos with the Shooting Date-SearchPress the Search button Specify the target rangeYou can change the format of data printing „ Setting the Date Display FormatSelect Tool Box from the menu Select Date formatYou can change the language displayed on TV „ Changing the Language DisplayedSelect a language for display Use the button to select Yes and then press the button „ Resetting All SettingsPrinting Photographs Directly from a Digital Camera Connecting to a Digital CameraPage Card Size „ Confirming or Changing the Camera SettingsAbout the Settings Explained Below Direct Printing from PictBridge-compatible Digital CamerasPaper type Photo About LayoutCard #1 Card #2 Card #3 „ Media Types for Digital CameraPrinting Photos with Infrared Compatible Mobile Phones Setting the Media Type, Page Size, and Layout„ Displaying and Setting the Infrared print Screen Prepare settingsSize Sticker „ Other Setting ItemsSelect Infrared print Turn on the printer Load the paper See Loading Paper on Performing Infrared Printing„ Printing a Photo with a Mobile Phone and the Printer Start Infrared CommunicationDisplay Photo received via infrared screen is displayed „ Printing a Photo by Displaying it on TVDisplay a photo taken with a mobile phone on TV Start Printing Prepare the Printer Installing the Printer Driver„ Installing the Printer Driver-Windows Printing with the computerRead the License Agreement, then click Yes to continue Click Easy InstallInstallation will begin For U.S. customer only „ Installing the Printer Driver-MacintoshWhen the Installation Results window appears, click OK NextDouble-click the Memory Card Utility folder Software installation is completeSoftware installation will start Double-clickSELPHY DS700 xxx.pkgDouble-clickMemory Card Utility 300.mpkg Installation„ User’s Guide Table of Contents How to View the User’s Guide„ How to View the User’s Guide-Windows „ How to View the User’s Guide-MacintoshPrinting the Nozzle Check Pattern on Printing MaintenancePrint Head Cleaning on Print Head Deep Cleaning onPrint the Nozzle Check Pattern When no white stripes appearWhen White stripes appear „ Printing the Nozzle Check PatternConnect TV to the printer and turn them on „ Print Head CleaningStart Print Head Cleaning Start Print Head Deep Cleaning „ Print Head Deep CleaningAlign the Print Head „ Aligning the Print HeadPrint the Pattern Ink tank BCI-16 Color Replacing an Ink Tank„ Replacing an Ink Tank Open the coverPrint head holder moves to the right Prepare a replacement ink tankRemove the empty ink tank Insert the ink tankTo reset the ink counter from Tool Box „ Resetting the Ink CounterReset the ink counter „ How Low Ink Warning Setting Works Nothing is Displayed on TV/Image is Poor TroubleshootingMessage is Displayed on TV Remote Control is not WorkingSelect Off and then press the OK button Error codeSelect Tool Box and then press the OK button Handling Error Messages Paper Does Not Feed Properly Print head is misaligned Ink tank is not installedCleaning on Media type is notPrinted Surface is Scratched or Ink Blots Select Long or Longer and then press the OK button Select Ink drying wait timePhone PrintingDown Its peripheral componentsCannot Print Properly from the Digital Camera Printer error Install a print head. See Installing the Print Head onDefective. Contact a Canon service representative Service representative as early as possibleFailure screen Cannot Install the Printer DriverClick Start Over on the Installation Appendix SpecificationsCamera Direct Print Cleaning the printer Safety PrecautionsAppendix For 220-240V, 50/60Hz model Regulatory Information„ Color Printer Model K10248 DS700 „ Canadian Radio Interference Regulations „ Remote Control K30240 RC-10Index IndexPhoto Print Printing a Photo by Displaying it on TV Xxxxxx Canon INC.2004
Top Page Image Contents