Troubleshooting
Printer Does Not Start or Printer Stops During Print Jobs
Possible Cause | Try This |
Print head has | Stop printing and turn the printer off for at least 15 minutes to |
overheated due to long | allow the print head to cool down. |
periods of continuous | The print head tends to overheat when printing continuously for |
printing | long periods of time. The print head is designed to automatically |
| pause at line breaks before resuming printing in order to cool |
| down. |
| Caution |
| The area around the print head can become extremely hot during |
| extended print operation. Always avoid touching the print head |
| and its peripheral components. |
|
|
Printing | Wait until the print job finishes. |
photographs | The POWER lamp flashes green while the print data is being |
| processed. Printing photographs can take time. |
|
|
The infrared | Place the printer at a distance of 7.9 inch/20 cm from the mobile |
communication distance | phone. |
or the infrared port angle | Ensure that the infrared ports are at a proper angle and there are |
is incorrect | no obstacles between them. Retry printing. |
| The allowable distance and angle for infrared communication |
| depend on the functions of the mobile phone in addition to |
| environmental conditions. |
| See “Printing Photos with Infrared Compatible Mobile Phones” on |
| page 44. |
|
|
72