Canon DS700 manual Resetting the Ink Counter, Reset the ink counter

Page 64

Printing Maintenance

note

•To maintain optimal print quality, use an ink tank within six months of its first use.

•Once an ink tank has been used, do not remove it from the printer and leave it out in the open. This will cause the ink tank to dry out and the printer may not function properly if it is reinstalled.

•Color ink is consumed in the head cleaning and deep cleaning, which are necessary to maintain the printer’s capabilities.

•When an ink tank runs out of ink, replace the ink tank with a new one immediately.

•If printing is continued with no ink in the ink tank, a problem may occur.

Resetting the Ink Counter

When an ink tank is replaced, the ink counter must be reset.

The low ink warning is only displayed properly if the ink counter is reset.

Message Prompting Confirmation of Ink Tank Replacement

If an ink tank is removed, the printer will output a message prompting you to confirm replacement of the ink tank at the start of the next print job.

When an ink tank has been replaced, follow the procedure below to reset the ink counter. The low ink warning is only displayed properly if the ink counter is reset.

1 Reset the ink counter.

(1)Check the message, select Yes and then press

the button.

This returns the ink level of the ink counter full.

Mistakenly selecting No, instead, will prevent the low ink warning from functioning properly. If such is the case, select Ink counter reset from Tool Box to reset the ink counter.

note

To reset the ink counter from Tool Box

1Connect TV to the printer and turn them on. See “Connect TV to the printer.” on page 13.

2Select Tool Box and then press the button

3Select Ink counter reset and then press the button.

The Ink counter reset confirmation screen is displayed.

4Select Yes and then press the button.

62

Image 64

Contents Photo Printing Guide Exif Print Contents Introduction TroubleshootingAppendix Power Cord Easy Setup InstructionsUnpack the Printer Preparing the Printer Place the printer on a flat surfaceRemove the tape from the printer Tape position is subject to changeInstalling the Print Head Press the lock button, then raise the lock leverRemove the protective cap from the print head Place the print head in the holderInstalling an Ink Tank Lock the print head into place by lowering the leverTake out the ink tank Hold the ink tank as shownPrinter Printer Parts and Their FunctionCover Buttons on the Remote Control Supplied power cordPower Button Move to the left if ink smudges or the printedSettings Button Printer Parts and Their Function Search ButtonCopies +- Buttons FeetCLASS1 LED Product Menu Screen Page Preparation When Using the Printer with the TV „ Connecting to TVCheck the following before connecting the printer to the TV Displaying a Photo on TV„ Turning off TV and the printer Connect to TVTurn on TV and the printer Check the following before turning off TV and the printerUsing a Memory Card „ Memory Cards Supported by this printerSupported memory cards are as follows Supports„ Inserting a Memory Card Insert only a single type of memory cardTurn on For xD-Picture Card, use the compliant adapter Turn on„ Removing a Memory Card Card eject button Indicator lampIf you use other cards Loading Paper „ Print Media to Avoid„ Loading the Print Media Turn on the printerLoad the paper Prepare to load paper101.6 × 152.4mm Photo stickers ×6 paper „ Media Types for Card Direct Printing Photo Paper Pro 101.6×152.4 mm ×6 up to 20 sheets101.6×152.4 mm Photo Paper Plus Glossy ×6 up to 20 sheets Paper ×6 up to 20 sheets Credit CardViewing and Printing from the TV Overview Enjoy Photos on TV and Printing -Basic„ Viewing Each Photo on TV and Printing-Photo Gallery Select Photo Gallery Select the photo to printEnjoy Photos on TV and Printing -Basic Menu Screen Use the WX buttons to selectConfirm the settings Start printingConfirm the Page size and Media type Press the Copies +/CopiesPrepare to print Select Photo PrintPhoto Print Press the OK buttonCancel all Specify the number of copies to printUse the Copies +/Copies PreviousEnjoy Photos on TV and Printing -Advanced Selecting Various Print Option-Print Studio„ Specifying the Layout Photo×2 Photo×4 Photo×8Select Layout print Specify the layoutSelect the paste method Paste allPaste photos one by one „ Printing Stickers from a Favorite PhotoStickers ×16 Select Sticker print Select Print all „ Printing All PhotosYou can print all photos saved on a memory card „ Printing a Photo List-Print Index Select Print indexSelect Dpof print Handy Functions and Settings „ Specifying the Paper and Other SettingsPress Settings button Settings screen is displayedBorderless print Prints on the whole paper without a borderPrints with a border Date print Prints the date the photo was taken„ Searching for Photos with the Shooting Date-Search Press the Search buttonSpecify the target range Press the button„ Setting the Date Display Format Select Tool Box from the menuSelect Date format You can change the format of data printingSelect a language for display „ Changing the Language DisplayedYou can change the language displayed on TV „ Resetting All Settings Use the button to select Yes and then press the buttonConnecting to a Digital Camera Printing Photographs Directly from a Digital CameraPage „ Confirming or Changing the Camera Settings About the Settings Explained BelowDirect Printing from PictBridge-compatible Digital Cameras Card SizeAbout Layout Paper type Photo„ Media Types for Digital Camera Card #1 Card #2 Card #3Setting the Media Type, Page Size, and Layout „ Displaying and Setting the Infrared print ScreenPrepare settings Printing Photos with Infrared Compatible Mobile PhonesSelect Infrared print „ Other Setting ItemsSize Sticker Performing Infrared Printing „ Printing a Photo with a Mobile Phone and the PrinterStart Infrared Communication Turn on the printer Load the paper See Loading Paper onDisplay a photo taken with a mobile phone on TV „ Printing a Photo by Displaying it on TVDisplay Photo received via infrared screen is displayed Start Printing Installing the Printer Driver „ Installing the Printer Driver-WindowsPrinting with the computer Prepare the PrinterInstallation will begin Click Easy InstallRead the License Agreement, then click Yes to continue „ Installing the Printer Driver-Macintosh When the Installation Results window appears, click OKNext For U.S. customer onlySoftware installation is complete Software installation will startDouble-clickSELPHY DS700 xxx.pkg Double-click the Memory Card Utility folderInstallation Double-clickMemory Card Utility 300.mpkgHow to View the User’s Guide „ How to View the User’s Guide-Windows„ How to View the User’s Guide-Macintosh „ User’s Guide Table of ContentsPrinting Maintenance Print Head Cleaning onPrint Head Deep Cleaning on Printing the Nozzle Check Pattern onWhen no white stripes appear When White stripes appear„ Printing the Nozzle Check Pattern Print the Nozzle Check PatternStart Print Head Cleaning „ Print Head CleaningConnect TV to the printer and turn them on „ Print Head Deep Cleaning Start Print Head Deep CleaningPrint the Pattern „ Aligning the Print HeadAlign the Print Head Replacing an Ink Tank „ Replacing an Ink TankOpen the cover Ink tank BCI-16 ColorPrepare a replacement ink tank Remove the empty ink tankInsert the ink tank Print head holder moves to the rightReset the ink counter „ Resetting the Ink CounterTo reset the ink counter from Tool Box „ How Low Ink Warning Setting Works Troubleshooting Nothing is Displayed on TV/Image is PoorRemote Control is not Working Message is Displayed on TVSelect Tool Box and then press the OK button Error codeSelect Off and then press the OK button Handling Error Messages Paper Does Not Feed Properly Ink tank is not installed Cleaning onMedia type is not Print head is misalignedPrinted Surface is Scratched or Ink Blots Select Ink drying wait time Select Long or Longer and then press the OK buttonPrinting DownIts peripheral components PhoneCannot Print Properly from the Digital Camera Install a print head. See Installing the Print Head on Defective. Contact a Canon service representativeService representative as early as possible Printer errorClick Start Over on the Installation Cannot Install the Printer DriverFailure screen Specifications AppendixCamera Direct Print Safety Precautions Cleaning the printerAppendix „ Color Printer Model K10248 DS700 Regulatory InformationFor 220-240V, 50/60Hz model „ Remote Control K30240 RC-10 „ Canadian Radio Interference RegulationsIndex IndexPhoto Print Printing a Photo by Displaying it on TV Xxxxxx Canon INC.2004