Actiontec electronic 802PSG Configuring the Print Server, To configure the Print Server

Page 11

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

3.Plug the large end of the Power cord into an electrical wall outlet, and the smaller end in the Power (marked “12VDC”) on the back of the Print Server.

4.Make sure the Power and LAN lights on the front panel of the Print Server are blinking or glowing steadily.

The Print Server is connected to a computer. Next, go to “Configuring the Print Server,” below.

Configuring the Print Server

To configure the Print Server:

1.Insert the Installation CD in the CD-ROMdrive of the computer. When the window shown below appears, click Install Print Server Manager.

8

Image 11

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPrinter 1 Light Getting to Know the Print ServerPWR Light Wlan LightP2, P3 Ports Power PortPrinter 3 Light LAN LightTechnical Support Reset ButtonTechnical Support LAN PortThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Print Server Name SetupDevice Info SMB Group Name Set User Name/PasswordSave/Cancel Dhcp Server Netware Server Queue Serviced by PrinterPolling Time Printer Type Zone NamePort Name Upgrade FirmwarePrinting Protocols Wireless Function Box. Click Next Scan for your local Wireless NetworkAssign Your Wireless Network Manually WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootTo access the Web Adminsitrator Using the Web AdministratorAccessing the Web Administrator Printer Server Name Device SetupDevice Name Displays the Print Server’s device nameMAC Address Wireless LAN StatusModel Type System Up TimePrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank Printer prints strange or nonsensical characters TroubleshootingWhile saving settings, a Save Timed Out error occurs Printer Server Utility does not detect the Print ServerThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty