Actiontec electronic 802PSG Device Setup, Device Name, Displays the Print Server’s device name

Page 41

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

The Web Administrator appears.

There are three options at the top of the screen: Device Setup, Setup Wizard, and System Tools.

Device Setup

The Web Administrator’s “Device Setup” screen, (shown above) displays the cur- rent configuration of the Print Server. There are seven Device Setup options, listed along the left side: System Printer, TCP/IP, SMB, SNMP, NetWare, and AppleTalk. Click the option to generate an informational screen. None of the settings can be changed from the Device Setup screens

System

The “System” screen (shown above) displays information about the Print Server.

Device Name

Displays the Print Server’s device name.

Printer Server Name

Displays the Print Server’s network name.

38

Image 41

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPWR Light Getting to Know the Print ServerWlan Light Printer 1 LightPrinter 3 Light Power PortLAN Light P2, P3 PortsTechnical Support Reset ButtonLAN Port Technical SupportThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Print Server Name SetupDevice Info SMB Group Name Set User Name/PasswordSave/Cancel Dhcp Server Netware Server Queue Serviced by PrinterPolling Time Printer Type Zone NamePort Name Upgrade FirmwarePrinting Protocols Wireless Function Box. Click Next Scan for your local Wireless NetworkAssign Your Wireless Network Manually WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootTo access the Web Adminsitrator Using the Web AdministratorAccessing the Web Administrator Device Name Device SetupDisplays the Print Server’s device name Printer Server NameModel Type Wireless LAN StatusSystem Up Time MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank While saving settings, a Save Timed Out error occurs TroubleshootingPrinter Server Utility does not detect the Print Server Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty