Actiontec electronic 802PSG user manual System Tools, Load Default

Page 53

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

System Tools

Selecting System Tools from the Web Administrator at the top of the screen gen- erates the “System Tools” window. There are three options in the System Tools screen: Load Default, Upgrade from Browser, and Backup Setting.

Load Default

Selecting Load Default from the menu of the left side of the System Tools screen generates the “Load Default” screen (see above). Here, the factory default settings of the Print Server can be reloaded. Click OK to reload the factory default settings.

Upgrade from Browser

Selecting Upgrade from Browser from the menu of the left side of the System Tools screen generates the “Upgrade from Browser” screen.

To upgrade the firmware of the Print server, click Browse. Find the upgrade file and select it. When it appears in the text box in the Upgrade from Browser win- dow, click OK. The Print Server’s firmware is upgraded.

50

Image 53

Contents Wireless Multiport Print Server Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesPWR Light Getting to Know the Print ServerWlan Light Printer 1 LightPrinter 3 Light Power PortLAN Light P2, P3 PortsTechnical Support Reset ButtonLAN Port Technical SupportThis page left intentionally blank Connecting the Print Server Setting Up Print ServerTo configure the Print Server Configuring the Print ServerSetting Up the Print Server Page Setting Up the Print Server Page Setting Up the Print Server Page Configuring the Printer’s Settings Connecting the Printer Accessing the Print Server Manager Using the Print Server ManagerStatus MAC ID Print Server Name SetupDevice Info SMB Group Name Set User Name/PasswordSave/Cancel Dhcp Server Netware Server Queue Serviced by PrinterPolling Time Printer Type Zone NamePort Name Upgrade FirmwarePrinting Protocols Wireless Function Box. Click Next Scan for your local Wireless NetworkAssign Your Wireless Network Manually WEP Ascii DisableWEP HEX After configuring, click NextAfter selecting, click Next WPA shared keyLocation ContactWizard Using the Print Server Manager Page Refresh ReportSearch RebootTo access the Web Adminsitrator Using the Web AdministratorAccessing the Web Administrator Device Name Device SetupDisplays the Print Server’s device name Printer Server NameModel Type Wireless LAN StatusSystem Up Time MAC AddressPrinter SMB Page Setup Wizard Page Using the Web Administrator WPA- shared key WEPUsing the Web Administrator Page Using the Web Administrator System Tools Load DefaultUsing the Web Administrator This page left intentionally blank Welcome window appears. Click Next Accessing Printers From the NetworkPage Accessing Printers From the Network This page left intentionally blank While saving settings, a Save Timed Out error occurs TroubleshootingPrinter Server Utility does not detect the Print Server Printer prints strange or nonsensical charactersThis page left intentionally blank Specifications a Relative Humidity 80 % non-condensing Limited Warranty Year Using Internet Printer Protocol Page Appendix b Using Internet Printer Protocol This page left intentionally blank Glossary Access PointPage Ssid Page Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty